Masswestern
Member
- Joined
- Jul 23, 2019
- Messages
- 41
Fixed my sewing machine which was a free99 husqavarna 940...decided to do some sewing with little experience. I was having a lot of trouble with the thread stripping and basically breaking. I was running nylon thread from the bottom (not bonded) and polyester outdoor coats from the needle. I swapped both and same issue occurred. Also the machine doesn’t have a reverse stitch mode so every time I try to lock a thread that’s usually a guaranteed break in thread. For the record this is a prototype I don’t intend on using it. But looking for advice and help. Thanks