shwacker
Well-Known Member
- Joined
- Dec 10, 2018
- Messages
- 984
Posted this on the FB saddle hunter too, just wanted to put it here for any other ideas for improvements or to help others with questions on making a setup.
Been messing with this stuff for a couple months now. Thought I’d share what I’ve built.
API 24inch mod sticks are 2.75 each, 8.25 for all 3, that is with aiders on each and the 1/4 inch amsteel. Gets me 18ft, 20ish to platform. My diy platform (assassin seat with DanO brackets, with double step on the top of it) is 3.5 pounds with amsteel and a cambuckle strap. My diy saddle is 3.75 pounds ready to hunt, linesman w/ ropeman, 3 biners, amsteel secondary for crossing branches, pruners, bow hoist rope, and accessory strap/hooks.
Still new to this, if an experienced person sees something I’m missing or should/could alter I’m open to suggestions. Thanks
Sent from my iPhone using Tapatalk
Been messing with this stuff for a couple months now. Thought I’d share what I’ve built.
API 24inch mod sticks are 2.75 each, 8.25 for all 3, that is with aiders on each and the 1/4 inch amsteel. Gets me 18ft, 20ish to platform. My diy platform (assassin seat with DanO brackets, with double step on the top of it) is 3.5 pounds with amsteel and a cambuckle strap. My diy saddle is 3.75 pounds ready to hunt, linesman w/ ropeman, 3 biners, amsteel secondary for crossing branches, pruners, bow hoist rope, and accessory strap/hooks.
Still new to this, if an experienced person sees something I’m missing or should/could alter I’m open to suggestions. Thanks
Sent from my iPhone using Tapatalk