• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

How to modify your Hawk Helium climbing sticks - A step by step guide for dummies (aka me)

Thanks G2 - just received my new Heliums the other day. Looking forward to making these mods and stacking 4 sticks the elk yinzer way!
 
Thanks for this, going to give it a shot soon with my spare stick and see how it goes.

As for the aider, is it moveable or multi-step? Looking forward to the video on that as well.


Sent from my iPhone using Tapatalk
 
g2outdoors said:
Modifying your Hawk Helium Sticks is easy to do. But be careful! Anytime you modify your gear, you’re taking a safety risk. You could get hurt or die! Do so at your own risk.

This is a step by step process for how to modify a set of Hawk Helium Climbing Sticks. I use this with a DIY Aider (video coming soon) to get over 20’ for less than 7 lbs. Overall the sticks are 22” long with a 20” step. However, you can make them whatever length you want. It's easy to adjust. They nest perfectly together with my rubber feet mod.

@DaveT1963 is the inspiration for this video. Thanks Dave! https://www.youtube.com/user/davetoms63

I also stole some ideas from @bowhunter15 Thanks Garrett! https://www.youtube.com/user/grprahl

Cheapest Hawk Heliums here https://www.mackspw.com/Hawk-1-PK-Climbing-Stick
Get your Mini VersaStraps here https://tethrdnation.com/product/versastrap/
Get your rubber feet here https://rubberfeet.us/store/?model_number=TF8T-TPR87
Get your Instamorph here https://www.amazon.com/dp/B004MFLU4...kCode=ic6&ascsubtag=amzn1.ideas.1XVYGJZZUSYON
Here is how I painted my Sticks https://youtu.be/dhONeCsz8Rs

Nuts & Bolts Needed
Drill Bit for Stand Offs and Steps = ¼”
Drill Bit for Rubber Feet = 24
Screws for Rubber Feet = 10-24 @ ¾” long
VersaButton = 1 ½” long 1/4x20 Stainless Bolt. (you might want to upgrade to a Grade 8 Bolt) 1” Fender Washer ⅜” wide aluminum spacer
Bungee Cord = I have no idea what bungee cord I used. It was lying in the garage so it got cut up. It is approximately ¼” in diameter and it’s camo. I like it.

View attachment 14493View attachment 14493

Here is the step-by-step video. Hopefully it helps someone.

Click to expand...

I went to Lowe’s yesterday and got 1 1/2” 1/4x20 grade 8 bolts along with fender washers and 3/8” spacers and on my 2019 sticks that 1 1/2 inch bolt was exactly flush with the back. I didn’t have enough thread to even start the nut. Is there a thickness difference between the 2019 and earlier models?
 
bowhuntr09 said:
I went to Lowe’s yesterday and got 1 1/2” 1/4x20 grade 8 bolts along with fender washers and 3/8” spacers and on my 2019 sticks that 1 1/2 inch bolt was exactly flush with the back. I didn’t have enough thread to even start the nut. Is there a thickness difference between the 2019 and earlier models?
Click to expand...
I do t think so. Let me measure the bolt again.

Sent from my SM-G975U using Tapatalk
 
bowhuntr09 said:
I went to Lowe’s yesterday and got 1 1/2” 1/4x20 grade 8 bolts along with fender washers and 3/8” spacers and on my 2019 sticks that 1 1/2 inch bolt was exactly flush with the back. I didn’t have enough thread to even start the nut. Is there a thickness difference between the 2019 and earlier models?
Click to expand...
My bolts are 1 1/2" and the spacer is 3/8. I have just enough room for the nut with no spare. The 2018 vs 2019 sticks seem to be the same width. Weird.

Sent from my SM-G975U using Tapatalk
 
g2outdoors said:
My bolts are 1 1/2" and the spacer is 3/8. I have just enough room for the nut with no spare. The 2018 vs 2019 sticks seem to be the same width. Weird.

Sent from my SM-G975U using Tapatalk
Click to expand...

That is odd. I double checked the package marking and actually measured them. Also, did you drill new holes for the versas or reuse the original?
 
bowhuntr09 said:
That is odd. I double checked the package marking and actually measured them. Also, did you drill new holes for the versas or reuse the original?
Click to expand...
The versabutton I made in the video was for the 2018 version. I think you may need a bigger bolt for the 2019. Maybe 3/8?

Sent from my SM-G975U using Tapatalk
 
g2outdoors said:
The versabutton I made in the video was for the 2018 version. I think you may need a bigger bolt for the 2019. Maybe 3/8?

Sent from my SM-G975U using Tapatalk
Click to expand...

It’s definitely a larger bolt than the 1/4x20 you used. I’m thinking I can reuse the existing with the proper spacer and washer unless the length would then interfere with stacking.
 
A lot of good people on this site. Appreciate u guys. This has site has enhance my enjoyment of the outdoors. Fuels my obsession:)
 
Also, if drilling new holes to relocate the buttons, do so very carefully; there is just 5/16" room between the channel walls for the hole.
 
You must log in or register to reply here.
Back
Top