Muddy pro sticks disassembly

[Brian_goes_hunting]

So I bought an Artisan outdoors mini platform. Started to take apart a muddy pro stick but can figure this part out. Any ideas on how to get this loose without damaging the bolt? Having issues loading a picture. But the steps are off. All that is left on the stick is the bolt and the spacer on the other side.

 

[Brian_goes_hunting]

Here

 

[ImThere]

Put the nut back on to protect the threads and hit the nut with a hammer it will pop right out. Do not engage the nylock threads.Then take the nut back off and pull it apart. whola


Sent from my iPhone using Tapatalk

 

[redsquirrel]

Put the nut back on to protect the threads and hit the nut with a hammer it will pop right out. Do not engage the nylock threads.Then take the nut back off and pull it apart. whola


Sent from my iPhone using Tapatalk

X2. It's just set in there really tight.

 

[Brian_goes_hunting]

Awesome thanks! It worked.

 

[iamcorey]

How do you guys like the top platform for the muddy pro?

I’m considering adding 1 for my stick. Does it interfere with 1 sticking to climbing height?


Sent from my iPhone using Tapatalk

 

[Brian_goes_hunting]

I don’t use the 1 stick method so I can’t say but I can’t anticipate it would interfere with it. So far in my testing both at ground level and 20 feet up I really like the platform. No issues with side pressure. I’ll be hunting with it Tuesday afternoon which will be the real test.