-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Platfform Post Question-*** problem solved**
- Thread starter txbowguy
- Start date
Definitely need 6061 aluminum and you can rivet a small piece of steel to it for reinforcement.
I made a custom bracket system, so I could only use 1" square. Most seem to use the 1/8" wall thickness, I opted for the 3/16." Extremely minimal as far as how much weight it added and very robust. @BCHunter is right, some sort of reinforcement under the leveling bolt is good. I used the LW stop that ordinarily comes on a hang on, but will probably have to beef it up eventually.
In that scenario the 1.5" may have actually hurt you. That larger face is a little less stiff than a 1" face i would think. If the dent is only the size of the leveling bolt head, then the size is probably irrelevant. I would just epoxy a piece of steel onto it to reinforce.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Not to advertise, but I heard of a guy selling DoubleSteps that might start stocking posts for platforms as well. The online prices are great but they gouge you for shipping - trying to come up with a more fair price.