- Joined
- Sep 15, 2023
- Messages
- 1,370
So I bought a used bino harness that didn't come with the safety tethers to attach the binos to the harness. I knew this ahead of time and was cool with it, as I planned to just use the safety tether from my junky harness and move it over to the marsupial.
Well that didn't work with the way my other tethers are attached, so I dug out my amsteel and some plastic clips. Made the tethers and also made two continuous loops to attach to the binos so I could use both ends of the plastic clips.
Popped a couple of split d rings off the 3d printer, and voila, amsteel bino safety tethers.


No real need for them to be amsteel obviously, but its what I had laying around and it gave me something to do for an hour.
BT
Well that didn't work with the way my other tethers are attached, so I dug out my amsteel and some plastic clips. Made the tethers and also made two continuous loops to attach to the binos so I could use both ends of the plastic clips.
Popped a couple of split d rings off the 3d printer, and voila, amsteel bino safety tethers.


No real need for them to be amsteel obviously, but its what I had laying around and it gave me something to do for an hour.
BT