Price includes shipping with insurance and tracking to conus only. I'm in AL so if you're on the west coast please pm me about shipping.
G&S or cover your fees please.
$215
Bought this over the .5 bc its smaller, which was what I wanted. Just can't justify keeping both. Includes all original straps and hardware plus some. It lools dirty in the pics but I used this stand on roughly 6-8 hunts and it has been modified in the following ways:
I drilled a hole and bolted the seat to the post so it's a 1 piece but the bolt can be removed and I have the thumb screw that it came with to use a 2 piece
I added a diy micro versa button to the bottom of the seat post to use amsteel daisy chain for securing lower portion. I determined I didnt need the lower strap but the button is there and this includes the 2nd ocb buckle.
I cut and installed a thermaseat seat cushion
The left hand side of the platform is drilled in 2 places for the lwcg sidekick bow holder (works great, not included)
Added a bungee to the seat post to hold platform to post during transport.
Note: I swapped one of the ooal ocb buckles for a EWO ocb buckle bc I thought it worked better, the ewo buckle will be included.
I used the top ocb buckle to lock the seat in the "pack" position for transport. Started to add a pushpin to lock it in place but the strap worked well enough for me.
The stand weighs 8.5lbs and has a 21" seat height (much preferred over the 18" of my .5, I'll likely regret selling this stand).
I think that's about it. All the specs are on the ooal site.
Sent from my SAMSUNG-SM-G930A using Tapatalk
G&S or cover your fees please.
$215
Bought this over the .5 bc its smaller, which was what I wanted. Just can't justify keeping both. Includes all original straps and hardware plus some. It lools dirty in the pics but I used this stand on roughly 6-8 hunts and it has been modified in the following ways:
I drilled a hole and bolted the seat to the post so it's a 1 piece but the bolt can be removed and I have the thumb screw that it came with to use a 2 piece
I added a diy micro versa button to the bottom of the seat post to use amsteel daisy chain for securing lower portion. I determined I didnt need the lower strap but the button is there and this includes the 2nd ocb buckle.
I cut and installed a thermaseat seat cushion
The left hand side of the platform is drilled in 2 places for the lwcg sidekick bow holder (works great, not included)
Added a bungee to the seat post to hold platform to post during transport.
Note: I swapped one of the ooal ocb buckles for a EWO ocb buckle bc I thought it worked better, the ewo buckle will be included.
I used the top ocb buckle to lock the seat in the "pack" position for transport. Started to add a pushpin to lock it in place but the strap worked well enough for me.
The stand weighs 8.5lbs and has a 21" seat height (much preferred over the 18" of my .5, I'll likely regret selling this stand).
I think that's about it. All the specs are on the ooal site.
Sent from my SAMSUNG-SM-G930A using Tapatalk