• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Redline Bow Sights

bigcat93

bigcat93

Well-Known Member
SH Member
Joined
Jul 15, 2015
Messages
982
Location
NJ
Anyone have any experience with the RL-2 single pin or 3 pin slider? They’re having a 50% off sale and for that discount I might try one
 
I have only messed with the sight. I thought everything was decent except for the pin. The pin seemed extremely thin and fragile. Unless they have changed that I wouldn’t trust it. I’d be out of my mind if I drew back and there was no pin in my sight.
 
Camelcluch said:
I have only messed with the sight. I thought everything was decent except for the pin. The pin seemed extremely thin and fragile. Unless they have changed that I wouldn’t trust it. I’d be out of my mind if I drew back and there was no pin in my sight.
Click to expand...
The one I really want isn’t on sale of course.. 3 pin slider with a .010 bottom pin and top 2 pins are .019
 
thanks for the tip. snagged the RL2 single pin at $65 with free shipping. can't beat that
 
not their sights but I have their quiver and it's quality. Plus it's $65. Less than a tank of gas, can't hurt to try
 
for what it's worth, sight showed up today. Very fast shipping for being free

Also came with a free beer coozie
 
@bigcat93 did you set yours up yet? I'm a little concerned with my elevation wheel. Counterclockwise movement is very loose, meaning it does't hold on its own unless I manually use the set screw at the same time, making it a two handed operation. Clockwise movement is very difficult to move and I don't need to use the set screw at all, even if I let go of the elevation wheel.

I don't think this is expected behavior.

EDIT - emailed redline and they responded almost immediately that it is not expected behavior and they are sending me a replacement. Very happy with the customer service.
 
Last edited:
I did not yet, but I also ordered their 3 pin and I’ve just started messing with that. I’ll check my single pin tomorrow!

Glad to hear CS was on it
 
You must log in or register to reply here.
Back
Top