• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Ring of Bolt spacing?

depends on tree diameter, tree angle, where I"m setting up for a potential target.
 
Equidistant around the tree, I guess? I usually run with 5, and don't hunt trees bigger than about basketball size if I can at all help it.

I can generally shoot 360 with just three bolts on most tree. I set a left one, a right one, and one directly below my tether. I spend 99% of my time camped out on the left and right, and use the middle one to assist with positioning for the shot.
 
It’s a very open ended question. On my strap on ros I pretty much space out five steps evenly around the tree. On a presets in the past I did the same and added double bolts where I thought I would spend the most time. This year I’m not drilling for my platform. Last year there were several presets that I would get to my platform and with the leaves off decided I needed to be higher. I wound up carrying my strap on set to every tree anyway.
 
This year I’m not drilling for my platform. Last year there were several presets that I would get to my platform and with the leaves off decided I needed to be higher. I wound up carrying my strap on set to every tree anyway.
Thanks, that does address one of my concerns.
 
Put two on the left and two on the right about 3 - 4 inches apart and you can rest your feet flat on them - very comfortable...- also with the 6 o'clock one for positioning like nutterbuster said.....
 
I found an answer, 8-10 inches apart if possible. It allows for a slow, quiet move around the tree. No more hard weight transfers.
Yeah, something in that range I find to be a good starting point, and vary it depending on the tree size/lean/etc.
 
Back
Top