I posted this before, so I’ll just copy and paste here as well.
I run exclusively Energizer Lithium batteries in my trail cameras. I do this for a few reasons.
1. They stay at max charge voltages SIGNIFICANTLY longer throughout their discharge cycle, dropping off sharply at the end.
2. They tend to be made to tighter standards and I have never had one leak.
4. They have a much less caustic chemistry composition, so if they were to leak it should do less damage to the camera.
Number 1. listed above is by far my biggest reason for running Lithium batteries. Computers are designed to work optimally at very specific voltages and amperages. The drop in supplied voltage from nickel-cadmium and nickel metal hydride can have unpredictable and negative effects on the function of the camera. As voltages drop motion sensors may lower in sensitivity or get buggy, read/write protocols may get corrupted, the chip that controls white balance and exposure may not be able to process fast enough to properly expose the picture... all kinds of issues occur more frequently with sub-optimal voltages.
With Lithium’s, I can run THOUSANDS of pictures and still be reading near peak voltages. I had a camera I checked a couple weeks ago that had a native grass seed head grow up right in front of it at the end of May. It had 13,800+ pictures on it, and the camera still read it as 98%. Now the capacity is definitely not at 90%, but it is running at voltages equivalent to what a NiMH or NiCd battery runs ONLY while it is still virtually full. (Update: The same camera has now added over 300 ultra quality videos to the same batteries)
One downside to lithiums is that the motion sensor stays MUCH more sensitive throughout the entire life cycle. This means more false triggers on moving objects in frame. But, I’d rather filter through a bunch of needless bird and mice pics (from a camera 15’ up and 18 yards away, pretty impressive) than miss even a single picture of a deer that might give me necessary information.
................................................................................All climbing methods, platforms, saddle designs, and/or use of materials possibly mentioned in the post above are not peer reviewed for safety, and should only be used as an example of my own method. Do your own research and testing before becoming confident in any DIY solution to support your life.
-IkemanTx