• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Start of my diy platform

J

Justin Harris

New Member
Joined
Feb 3, 2018
Messages
30
Location
Flemingsburg, KY
Started off as an old loc on hang on stand
76d9041aff0096e8a60ec8b17dfca639.jpg
f332cc40dde6b4d087ef8fde7a68819f.jpg
f30ba9b6c384b6e66bc577a73273a84b.jpg


Sent from my SM-G892A using Tapatalk
 
I took a piece of 1/2" x 3.5" aluminum 4" long and drilled 3-1.25 holes dead center and only an 1/8" apart. Then sawed it in half at the thinest points it that makes sense. Ended up with 2 mirrored pieces. I welded them to the 1.25 tubing wala. Cost 7$ for enough to make 6.
 
You must log in or register to reply here.
Back
Top