• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Trad guys.

I might take you up on this. Can you set it up even though I cannot draw it back? Or would it be better after I can? Not sure when I will be able to draw it back since this surgery. I figured this one would be a marathon not a dash


Sent from my iPhone using Tapatalk

No it needs to be tuned for you, set up like you want to hunt with it. Shooting with a quiver full of arrows can make a difference. Different string silencers can make a difference. Changes in your form can make a difference.
I can get you a string on it and some silencers. Find a close enough arrow and let you just start shooting and develop your form. Once you get consistent form, then you will be ready to tune.
I didn’t read all the post above. I didn’t know you wasn’t shooting. It would be a waste of time to try and tune an arrow if you hadn’t developed your form.
 
Sub 50# bow....I’d go two blade. You can use a three blade but it won’t be as efficient with the lighter weight.

Google the brace height.....that’s definitely going to affect arrow flight. Nock should start about 1/8” high. Don’t be concerned if it tunes at a high nock point. Any carbon will have to be a 500 but a number of aluminums will work.

I disagree that you don’t tune until you have form. You need a tuned bow and proper arrow to take the guess work out of the rest. Before I knew better, I almost quit for that reason.
 
Sub 50# bow....I’d go two blade. You can use a three blade but it won’t be as efficient with the lighter weight.

Google the brace height.....that’s definitely going to affect arrow flight. Nock should start about 1/8” high. Don’t be concerned if it tunes at a high nock point. Any carbon will have to be a 500 but a number of aluminums will work.

I disagree that you don’t tune until you have form. You need a tuned bow and proper arrow to take the guess work out of the rest. Before I knew better, I almost quit for that reason.

You can get it close but how can you get an arrow to fly the same of you don’t shoot the same. If you don’t draw the same everytime, it won’t act the same, etc.
 
If your arrow doesn’t fly straight......form won’t matter. There is usually a pretty decent sized window of what will work and what won’t. For me, the key was tuned arrows. Once I saw they would all go to the same spot, it was so much easier to concentrate on what I may be doing wrong.
 
Man, I think everyone has pretty much covered it in the previous responses. My only advice is to practice shooting from deer hunting height, in the saddle, if you don't already.
 
Thanks for all the replies. I figured it would be a journey. That’s why I poised the question so early.
Right now I have zero use of my left arm. I’m excited to get back at it.
I have been shooting this bow for 30 years. I think when I can draw it back I can get back quickly


Sent from my iPhone using Tapatalk
 
Here she is, old lady! Lol
ed76fbe3a021704dbe0efe6523360a78.jpg
6bc0bbee8cf72598854109618a23c798.jpg
e6d7c2e684dbf2fc083bf47ec8ae2458.jpg
d630e8e0e7feb1b72a4767a41092b726.jpg



Sent from my iPhone using Tapatalk
 
I have another trad bow around here somewhere I need to dig out also.


Sent from my iPhone using Tapatalk
 
Last edited:
Here she is, old lady! Lol
ed76fbe3a021704dbe0efe6523360a78.jpg
6bc0bbee8cf72598854109618a23c798.jpg
e6d7c2e684dbf2fc083bf47ec8ae2458.jpg
d630e8e0e7feb1b72a4767a41092b726.jpg



Sent from my iPhone using Tapatalk
Nice.
It needs a side plate though.
Some guys put a little tooth pick or something similar under the side plate directly above the push point of the handle. That little trick helps cut down on torque effect.

Sent from my SM-G935V using Tapatalk
 
Nice.
It needs a side plate though.
Some guys put a little tooth pick or something similar under the side plate directly above the push point of the handle. That little trick helps cut down on torque effect.

Sent from my SM-G935V using Tapatalk

Can you explain this to me or link me to a picture to explain it?


Sent from my iPhone using Tapatalk
 
Old thread, but I just have to add that in addition to all the great advice above, the authoritative source for the answers you are seeking is Dr. Ed Ashby’s studies on terminal arrow performance. All scientific and done with Trad gear on live tissue.

Nice roll ups available on YouTube:


Or you can read the full reports which you can find online.

Wish I’d read them years ago. . .

Bottom line: High FOC, high overall mass, sharp 2 blade broadhead, good tune and arrow flight. You can get full pass through on deer with that weight.

Good Luck!
 
Back
Top