Lol yea I read post #57 and quoted you on the reply. Sorry that wasn’t directed at you but anyone who has been playing with the platform long enough to find a solid solution. I will try and give him a call for the secret squeak cure thanks.
-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Tree suit noise mods..
- Thread starter Nedrowjoe
- Start date
Good deal, I figured it couldn’t be that big of a problem but since I’m gettin one I thought I’d run through this thread again. Thanks for sharing.
I second this. Did a before/after test on the same tree. Squeaked horribly before but it was gone after sanding and painting
Mark has gone above and beyond with communication. And i think the above post is correct. You have to remove ALL the original finish from the side that contacts the tree. Even in the channels of the "teeth" im almost there.
I just got word from mark that they have come up with a solution. Some more agressive teeth that can be retrofitted on the existing tree suits.. that is my understanding anyway. What a good guy!! Way to take care of your customers!!
FWIW i have tried all the sanding,repainting,tape, and even took it down to bare metal. Seated it hard on the tree, used a ocb strap to get tighter, even used a ratchet strap. Some did not work at all some only temporarily. Until i put the screws in the posts then no noise. I'm not telling anyone to do this it was just info on what i did to fix my platform. It doesn't matter to me just relaying information that i found by trial and error. Thanks
I added 2 self tappers too, wished i hadnt but i did. It didnt change anything. I put them up higher. Just above the teeth
Not sure if they will send it with it.. but im POSITIVE mark will take care of you. I called the number on the website just to ask when mine would be shipped, he answered on the 2nd ring and spoke with me for several minutes as if i was an old friend. He has answered all my texts and questions, offered suggestions and updated me. I am beyond thrilled to have found the saddlehunting community.. it seems like i found MY people in the world of hunting...
@bodark - like @Nedrowjoe said, Mark Cama will indeed take care of you - just shoot him an email with your request to ensure you get the latest configuration.
Sent from my iPhone using Tapatalk
Last edited:
Vet tape as well as hockey tape worked on mine for about an hour then noise was back. Upon inspection bark had worn through the tape from flexing when moving. Just saying would hate for you to have a booner in sight then move to take shot and then be gone.
Wrapped it around. I shot off of it for about an hour and the tape didn’t really have much wear. I use a full roll for both legs.
anyone have an update on when Marc is planning on rolling out the new teeth to retrofit treesuit?
I emailed him this morning. He said they would begin machining something this afternoon.
Sent from my iPhone using Tapatalk Pro
