Anyone have these that likes or dislikes this platform setup? I am thinking about ordering a set. It appears to be the only ring of steps on the market.
Thanks
Thanks
Just watched your video on these! Big help thnxThey work fine with a good strap @Mobile one has started selling them with the same ratchet strap that I use as a platform. So if you order his platform you will get a good ratchet strap with them. You have to tighten then down really tight, it is why a good strap is important.
Thanks,
Boswell
It for sure is a heavy duty strap ! I didn't realize they had all black options until I talked to Bobby. I had initially purchased the others ... Nothing a little paint won't cure though ! Thanks !I just received an order of these yesterday. My initial impression is that they'll work well, though it'll probably be this weekend before I can really play with it at all. I will say the included ratchet strap seems to be very heavy duty, so I have little doubt about it getting them tight enough. It's literally heavy too, though- I'd guess the ratchet strap alone comes close to outweighing the 6 steps combined. That's not an issue for me but may matter in some cases. I was pleased that it did come with the "all black" ratchet. From the images on their site, I wasn't sure that it would, because the images show the brass ratchet.
Email me and I will send you a new one .I was using mine today and part of the ratchet bent and it was useless after that. Im not sure if it was a fluke or not. It was the ratchet that Boudreaux links to in his youtube video. You really have to tighten it down so the steps dont move...but perhaps that pushes the ratchet too much. The piece that bent is the flat part that engages the teeth.
I just double checked the rating on the ratchet. The ratchet has a 3300# break strength ! That is an incredible amount of pressure. It could possibly have been a defect , hard to say . But again , email me and I will be glad to send you a new one . Thanks again!I was using mine today and part of the ratchet bent and it was useless after that. Im not sure if it was a fluke or not. It was the ratchet that Boudreaux links to in his youtube video. You really have to tighten it down so the steps dont move...but perhaps that pushes the ratchet too much. The piece that bent is the flat part that engages the teeth.
I just double checked the rating on the ratchet. The ratchet has a 3300# break strength ! That is an incredible amount of pressure. It could possibly have been a defect , hard to say . But again , email me and I will be glad to send you a new one . Thanks again!
The straps are 5' long which is actually probably too long by the time your reach hunting height , even in the biggest tree ...How long is the strap on these platforms?
Sent from my SM-G950U using Tapatalk
Send me an email anyway , we can work something out , my goal is you happy.I appreciate the offer, and maybe I was not clear. The ratchet was not from Bullman, it was from a link Boudreaux listed on his youtube video. Thank you...if you still want to send me a ratchet.... ....