@Adrena123, I actually ordered some 1" square aluminium tubing, and I will fabricate arms from that, so that I can test without cutting into my lone wolf arms. I also had some aluminum angle pieces lying around, so I built a "seat" from scratch to the dimensions the modified Lone Wolf would be. I used 3/4 inch plywood for the platform. I will post pictures after I'm finished.
If this works, I would have two working units (not that anyone would require more than one) The beauty of the saddle system is that even if my prototype were to fail, I'll still be in my saddle. I would never chance building my own climber!
If this works, I would have two working units (not that anyone would require more than one) The beauty of the saddle system is that even if my prototype were to fail, I'll still be in my saddle. I would never chance building my own climber!