My man!!! You hit that DIY mod out of the park! Well done!!!!!!!!!!!!!!!!!!!
haha, I had the same idea with the boat cleat, but I'm glad @Wirrex could figure this out. I'm going to try this on a stick tonight.I been thinking of a boat cleat but this would work the same way with a rope mod. Just wrap the tag end like you would on a boat cleat.
How did you like it on a stick??haha, I had the same idea with the boat cleat, but I'm glad @Wirrex could figure this out. I'm going to try this on a stick tonight.
So I figured out that I don't even need to do anything to some of my sticks to use them like a cleat on a boat, but if I did, I would change my sticks in a second. This is so quick, quiet, and secure. Everyone needs to ditch the versa buttons for a single bolt through the sides!How did you like it on a stick??
Sent from my SAMSUNG-SM-J727AZ using Tapatalk
Should be able to just put a locking brummel in the amsteel and bolt it to the back of the stick with a washer on the back of the tab bolt. Just use the tabs the way they are. These aren't exactly the same, but close. Another guy on here was going to try, haven't heard back yet.Has anyone found a good way to do this on Helium sticks? I was thinking about welding a tab to the center of a bolt, then drilling a hole in the tab and bolting it to the helium’s in the same hole the original mount was placed. That would leave either end of the bolt hanging past the vertical beam for attaching too. Is there a better/easier way?
Sent from my iPhone using Tapatalk
Should be able to just put a locking brummel in the amsteel and bolt it to the back of the stick with a washer on the back of the tab bolt. Just use the tabs the way they are. These aren't exactly the same, but close. Another guy on here was going to try, haven't heard back yet.
Sent from my moto z3 using Tapatalk