Rappel Rope, Friction Hitches, Tender

[cheecho67]

Yes I was thinking of that and definitely will look further on that even though I have watched pretty much all your videos just need to get comfortable with tying knots and actually climbing.


Sent from my iPhone using Tapatalk

 

[cheecho67]

Are you building an SRT system? If so, then I would agree that this is a great combination. The last piece is deciding what retrievable anchor(s) you prefer. For me, if I could only use one anchor, it would be the Maverick hitch. Let me know if you need any help. I have a lot of info growing on my website too. That's what I do. Cheers

JrbTreeClimbing.com, affiliated with RockNArbor.com

So you put that dishwasher tube for your garda foot loop how did that go?


Sent from my iPhone using Tapatalk

 

[Brocky]

Two Blake’s hitches can be used to easily descend, alternate pushing down on each, one holds while the other slides. Increasing the speed of working the hitches showed that equalized pressure on both allowed them to slide at the same time, sharing the load.

I know this is another dumb question but, has any used an ATC with a hitch above to rappel? I’m looking to use a VT or a schwabisch hitch above my ATC. Has anyone had any experience with these?

This is one method, device has the keeper cable cut off.

So which hitch is more dependable? The longhorn agile ,the agile hitch or the ascender hitch? What’s your go to? And anyone else’s input is welcomed.

I prefer the Sticht, WLR with various braidings, and for a quick easy double eye cord, preferred over a loop, the last hitch shown is five wraps and two half hitches, one in front and one in back.

 

[John RB]

So you put that dishwasher tube for your garda foot loop how did that go?


Sent from my iPhone using Tapatalk

Great question. I removed it. It wasn't always in the right place, it adds bulk and i just didn't need it.

JrbTreeClimbing.com, affiliated with RockNArbor.com

 

[cheecho67]

OK, I’m trying to tie the longhorn hitch. The right side of the hitch looks right ,being that the tail is towards you, but the left side doesn’t look quite right. I think I am following it step by step. Here are some pics. Ok might have issues with pics.

 

[cheecho67]

OK, I’m trying to tie the longhorn hitch. The right side of the hitch looks right ,being that the tail is towards you, but the left side doesn’t look quite right. I think I am following it step by step. Here are some pics.

 

[Dope on a Rope]

Two Blake’s hitches can be used to easily descend, alternate pushing down on each, one holds while the other slides. Increasing the speed of working the hitches showed that equalized pressure on both allowed them to slide at the same time, sharing the load.
View attachment 102099


This is one method, device has the keeper cable cut off.
View attachment 102100


I prefer the Sticht, WLR with various braidings, and for a quick easy double eye cord, preferred over a loop, the last hitch shown is five wraps and two half hitches, one in front and one in back.
View attachment 102101

Can anyone confirm if I got this sticht correct?

 

[Brocky]

That’s it, the “ring” could be a little smaller to keep it firm, rather than wrapping around the rope when loaded. The stopper could be closer to the rope, pay attention to completely tightening it.

 

[chaded]

I have started playing around with the sticht. I love how it breaks effortlessly with weight on it. The problem I am running into is after putting weight on it a couple times it gets to the point where it binds up and I can’t tend it up. I suppose putting something on there to act as a tender would probably help with that. I could be doing something wrong as well.

Is anyone rappelling on this hitch? Or is that a ”no-no”? Seemed to work pretty smooth for the couple feet I was using it for.

 

[Dope on a Rope]

That’s it, the “ring” could be a little smaller to keep it firm, rather than wrapping around the rope when loaded. The stopper could be closer to the rope, pay attention to completely tightening it.

I left it loose because I tied it on a piece of leftover rope and not a rope I will be climbing on. So I’ll either move it or use as a reference

 

[Brocky]

I have started playing around with the sticht. I love how it breaks effortlessly with weight on it. The problem I am running into is after putting weight on it a couple times it gets to the point where it binds up and I can’t tend it up. I suppose putting something on there to act as a tender would probably help with that. I could be doing something wrong as well.

Is anyone rappelling on this hitch? Or is that a ”no-no”? Seemed to work pretty smooth for the couple feet I was using it for.

Sounds like it might be tied wrong, are you crossing the ends in the back once or twice?
You should be able to descend with it as long as it’s not too fast.

 

[chaded]

Sounds like it might be tied wrong, are you crossing the ends in the back once or twice?
You should be able to descend with it as long as it’s not too fast.

I believe I am crossing twice for one full twist. These pictures I had one more wrap on the coil then I usually was doing just to try.

 

[Brocky]

The extra wrap will help, but it looks like the ring is too big, which makes it wrap around the rope and allows the twist, done correctly, to loosen up and allow slack from the wraps to move downward. It tightens up while the eyes would get a little bigger.