I got a cut down helium at 18” and was considering trying a cleat
Sent from my iPhone using Tapatalk
I can see that point, but Rebel_1125 explains in another post why the load would be so distributed that the cam would take only a small portion of the weight (having to do mainly with the fact that half the weight is supported by the fixed end of the rope and only the other half in the cam. Maybe I'll go ahead and order a 150, because why not (except I guess the sticks don't stack well with the bigger cleat), but a lot of guys say they use the micro.Wouldn’t use the micro. Not rated high enough. Go with the Harken 150.
Thanks for that picture -- very helpful. It's good to see that the bolt spacing is different on the 150 and the micro, which is only about 1 inch.I installed a Harken 150 on my HH.
#10-24x2-½” stainless machine screws plus washers and nylon locking nuts.
Mounted here at @always89y recommendation - working well so far but only a couple short hangs.
Sent from my iPhone using Tapatalk
I apologize for my ignorance, but what is the platform mounted to your stick? I like the idea of a one piece design like that.
Sent from my iPhone using Tapatalk