jakhammer
Active Member
- Joined
- Nov 26, 2020
- Messages
- 140
yes they doDoes muddy own the patent to manufacture sticks with the cleats? I would assume other companies would have already jumped on this trend.
yes they doDoes muddy own the patent to manufacture sticks with the cleats? I would assume other companies would have already jumped on this trend.
full bury 1/4 works great - that's what I haveWell I have some 1/4in so I’ll try that.
I ended up getting the Schaefer cleat from Dano and installed it on my stick. My 1/4in amsteel slips through it. Have y’all found that? If I full bury it will that solve it? Or just buy more rope.
Don’t think so. This one goes up to 1/4” inch. I think the one on ewo goes 1/4” to 7/16”.Anyone use this one?
Can't tell if its the same one on EWO or not.Amazon.com : Schaefer Fast Entry Cam Cleat for Line Sizes Upto 1/4-Inch, 6mm, Aluminum : Sports & Outdoors
Amazon.com : Schaefer Fast Entry Cam Cleat for Line Sizes Upto 1/4-Inch, 6mm, Aluminum : Sports & Outdoorswww.amazon.com
I used this one. Probably overboard. I was just playing around while I waited for the Ultimate One Stick.
Amazon.com : Schaefer Fast Entry Cam Cleat for Line Sizes Upto 5/8-Inch, 16mm, Aluminum : Sports & Outdoors
Amazon.com : Schaefer Fast Entry Cam Cleat for Line Sizes Upto 5/8-Inch, 16mm, Aluminum : Sports & Outdoorswww.amazon.com
It didn’t come with hardware.
I drill a hole 1/4in for 6mm rope through the side of the stick then feed rope through and tie a stopper knot.
I have also done two holes same size and tied a figure 8 follow through.
Some tie a poachers knot directly to alum tube... I don't have an example of that.
Make sure there are no sharp edges.
I did it in between the holes for the cam cleat hardware just on the other side wall.Where exactly do you drill the hole? On top of the cleat? Middle? Below? I was wondering about this. Does it hold pretty well? The stopper knot one.
Sent from my iPhone using Tapatalk