- Joined
- Jan 17, 2019
- Messages
- 6,284
For those that have handled them, is it possible to remove the metal bar on the d-ring side and then reinstall it? I don't want to order and be surprised.
The reason I ask is that I would like to put this on an existing loop of sewn webbing.
Cobra makes a buckle to do just that, but it is for the 1.75" webbing common for mil spec (shown here as an example). https://austrialpin.net/product/cobra-retrofit/
I would like to do this for a 1" buckle/webbing combo.
Based upon ease of manufacturer, I'm guessing one side of the Cobra d-ring buckle is a solid end and the other end slides through the buckle and probably attaches with a flat metal clip that might possibly be removed carefully and then reinstalled. Either that or maybe a press fit kind of rivet (harder to deal with). I haven't been able to find good resolution photos of both sides of the buckle online.
D-Ring COBRA® ProStyle 18kN – AustriAlpin
austrialpin.net
The reason I ask is that I would like to put this on an existing loop of sewn webbing.
Cobra makes a buckle to do just that, but it is for the 1.75" webbing common for mil spec (shown here as an example). https://austrialpin.net/product/cobra-retrofit/
I would like to do this for a 1" buckle/webbing combo.
Based upon ease of manufacturer, I'm guessing one side of the Cobra d-ring buckle is a solid end and the other end slides through the buckle and probably attaches with a flat metal clip that might possibly be removed carefully and then reinstalled. Either that or maybe a press fit kind of rivet (harder to deal with). I haven't been able to find good resolution photos of both sides of the buckle online.