DCA Super Sabre 2.0

[bigcat93]

Anyone have issues with adhesion?

I have them on bohning wraps, some are fine and then some lose 1 after a couple shots. Seems random and I’m not sure if I’m getting contact anywhere because if I am, accuracy isn’t showing it.

 

[jtw0057]

I used the ez fletch on bareshafts and haven’t had a problem. Shooting through a whisker biscuit too with the heavy helical.

What jig yah using?


Sent from my iPhone using Tapatalk

 

[Irishman]

I used a priming pen first and Bob Smith Maxi-cure glue and have not had any issues with them on TAC wraps. I know they say you don't need to prime them first but I have always done it this way, adds about 10 seconds and super easy.
I am using an Arizona easy fletch with max helical

 

[bigcat93]

I’m using bitz, use primer pen and the blue loctite super glue that they suggest..

 

[Olegrad]

Yep. Emailed them and got no reply. Then tried primer pen and seemed to work better. Overall, I like their performance.

 

[bigcat93]

Same but now I have 4 arrows with 2 vanes lol

 

[Irishman]

I’m using bitz, use primer pen and the blue loctite super glue that they suggest..

You may want to try the Maxi-Cure glue, they sell it on their site but you can get the Bob Smith Maxi-Cure where ever, DCA just rebrand it but it's the same stuff. I would also double check your Bitz setup with a setup arrow or one you don't care about to make sure your making good contact with the shaft

 

[bigcat93]

Yeah maybe I’ll have to mess with helical.. that or I go back to AAE max or Q2i

 

[Camelcluch]

I would make sure you have good contact all the way through with the bitz. It’s a good jig but the metal and manufacturing is not super high tolerances.