I bought an Artic Body Suit and I am wanting to modify it for saddle hunting. My plan is to cut 2 slots in it for the bridge to go thru. Obviously a removable bridge is required. I live in PA so cold weather doesn't happen a ton to us, so hunting with the body suit would be limited. My plan is that I would climb and hook my stock bridge as I normally would. After cooling down I would then put on the artic suit. Then I would put on the removable bridge feeding it thru the slots. Then I could remove the standard bridge and I would just leave the stock bridge hanging there. Then I could zip up the suit.
So what would be an easy removable bridge to make? I have fooled some with amsteel, but not sure I want to hang my life off of something I made of amsteel. LOL. Was thinking about using one of the GM 16mm climbing sling. I could girth hitch on one side and then use a biner on the other. Is there any other simple bridge solutions? I don't need anything overly fancy as I would likely only use on a handful of hunts per year.
So what would be an easy removable bridge to make? I have fooled some with amsteel, but not sure I want to hang my life off of something I made of amsteel. LOL. Was thinking about using one of the GM 16mm climbing sling. I could girth hitch on one side and then use a biner on the other. Is there any other simple bridge solutions? I don't need anything overly fancy as I would likely only use on a handful of hunts per year.