Securing prusik knot with O-ring?

[AustinL911]

I could have sworn I saw somewhere where people somehow use an o-ring on a prusik knot to keep it from unraveling when not loaded. I'm trying to keep the small prusiks for my Aerohunter back band on my bridge line from loosening and falling off.

Ideas?

 

[Coathanger15]

Following

 

[pesqimon]

Tthrd backband tiny prusics have a tiny o ring to keep them from unraveling. Not sure where you’d get one.


Sent from my iPhone using Tapatalk

 

[Weldabeast]

Bull Hitch

I was having issues with the carabiner rotating around in the prusik knot. And with needing to make sure one keeps the correct load orientation on a carabiner, i tried several different things to stop it from happening. Nothing worked for me until I found the bull hitch knot. Rather then me...

saddlehunter.com

 

[Southpawshooter]

Here you go post 582 -

New Aerohunter saddle

Thats why I configure my Amsteel bridge the way I do on my Kestrel. I make an overhand knot or clove hitch around the loop before I do the bury. It locks tight on the loops. Its just an additional way to fine tune comfort. Sent from my SM-G935V using TapatalkThat's exactly it. Don't know how...

saddlehunter.com

 

[skyjacker]

Hey sorry. Here's the original post. Although I would take a look at the Ernie mod. This will probably be replacing the prusik loops ...

New Aerohunter saddle

Thats why I configure my Amsteel bridge the way I do on my Kestrel. I make an overhand knot or clove hitch around the loop before I do the bury. It locks tight on the loops. Its just an additional way to fine tune comfort. Sent from my SM-G935V using TapatalkThat's exactly it. Don't know how...

www.saddlehunter.com

 

[tam9492]

I used castration bands to secure mine. Works perfectly. After using a few for aiders, the bag of 500 didn’t have much use!