muzzypower
Well-Known Member
- Joined
- Aug 5, 2018
- Messages
- 443
What would you suggest? Have regular single panel as well as jx3 saddles.
What would you suggest? Have regular single panel as well as jx3 saddles.
ROSIs this for climbing or ring of steps? If for climbing and using the stock cam buckle straps, I cannot recommend the regular steps. Unless you are a ninja, they flip over on you and move around on the tree, even if you watch the 45 minutes of online instructions available.
It's the ring of steps, however I bought the EWO strap that cams over. It's not the steps. It's under the platform for saddle hunters. They show them as aluminum..the wrap didn't work for me so I used flex seal to coat them worked greatIs this for climbing or ring of steps? If for climbing and using the stock cam buckle straps, I cannot recommend the regular steps. Unless you are a ninja, they flip over on you and move around on the tree, even if you watch the 45 minutes of online instructions available.
I tried flex seal but it didn't adhere as well as I'd hoped......It's the ring of steps, however I bought the EWO strap that cams over. It's not the steps. It's under the platform for saddle hunters. They show them as aluminum..the wrap didn't work for me so I used flex seal to coat them worked great
So when ever you use flex seal 2 important things to know. It doesn't want to adhear to painted surfaces and paint doesn't stick to it. Get ACETONE and scrub them realllllly really good. Then do a final wipe w acetone before you hang them for spray. I use BOW STEING serving to hang them. Other wise the nails or screws or hooks get adhered to them to causing a dead spot after they cure or rips it off. W serving the serving gets coated and you can cut the serving off flush to the piece and let it remain in the coating. Also wait 24 hours between coats super important or it won't cure right. Make sure the surface is super clean before you spray and make sure you wait that 25hrs before a second coat. You can do 3 or four coats if you wish, but its important you put them on even and not too heavy each coat so it cures 100% between coats. If you do that it's amazing stuff. Mine hasn't rubbed off w 2 coats and that EWO strap gets them TIGHT to the tree.I tried flex seal but it didn't adhere as well as I'd hoped......
So when ever you use flex seal 2 important things to know. It doesn't want to adhear to painted surfaces and paint doesn't stick to it. Get ACETONE and scrub them realllllly really good. Then do a final wipe w acetone before you hang them for spray. I use BOW STEING serving to hang them. Other wise the nails or screws or hooks get adhered to them to causing a dead spot after they cure or rips it off. W serving the serving gets coated and you can cut the serving off flush to the piece and let it remain in the coating. Also wait 24 hours between coats super important or it won't cure right. Make sure the surface is super clean before you spray and make sure you wait that 25hrs before a second coat. You can do 3 or four coats if you wish, but its important you put them on even and not too heavy each coat so it cures 100% between coats. If you do that it's amazing stuff. Mine hasn't rubbed off w 2 coats and that EWO strap gets them TIGHT to the tree.
Yes? After failed plasti dip and the big globs and runs... I knew it wasn't gonna turn out well so I immediately removed it. The good thing about the spray going on in thinner layers is you can build it up, with out it being toooooo much off the bat. Yes I use the Spray. I did 3 total layers even though 2 even was enough I just did a third so I wouldn't need to do any maintenance sprays atleast until preseason next year and so far those 3 coats have not chipped off. Here they are...You used the spray? I tried dipping them in the can since the spray goes on so thin.