-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Treehopper Drill and bolts
- Thread starter Nugget
- Start date
In not for sure. But Treehopper offers a cordless drill bit. I have one and love it.
TH sells cordless bits.
The are metric size...I think 11mm (I can never remember which mm size). The bolts are 3/8" but you dont want a 3/8" bit.
Sent from my SM-G970U using Tapatalk
10mm. Don’t forget you need a drill stop to get consistent depth. Or just order the one from Mark for cordless drills. It works great.
I’m new to the forum. Started saddle hunting this year. I’m using LW sticks rn as my method but I hunt a lot of private too. I’ve seen videos and want to switch to bolts and a drill but have some friends trying to talk me out of it. Is it really worth it?
Compare bolts to screw in steps, not so much to sticks...its apples to oranges.
Bolts beat screw ins hands down.
I like bolt better than sticks, but thats just my opinion.
Sent from my SM-G970U using Tapatalk
I know it’s not apples to apples but I was going to set up trees with screw in steps this year and the price point of the bolts is what grabbed my attention.
I tried bolts this year and nothing beats the weight! also at end of the day pull them out as you come down the tree and on your way home. No stacking sticks or strapping to back pack also it's not bad to hand drill ten holes if you don't do presets.. I love it so far! there's nothing easier when the darkness comes. If you hunt bedding areas it's the quietest climbing method out there (IMO) especially if you prep in the summer. My biggest concern was killing trees but have found no evidence that it causes enough damage to kill a tree based on what I've read no more damage than screw in steps.
Sent from my SM-G950U1 using Tapatalk
I would advise bolts rather than screw ins. Next in line would be Cranford screw ins, and last on the list is Ameristep style screw ins. And if you use those, you want the install tool. But, for several reasons, bolts are still the best. Especially if you are hunting extremely hard trees like osage. And for pre sets, a cordless drill and bolts are the cats ass.
Sent from my SM-G970U using Tapatalk
I tried the bolt system and for me it stunk! Not trying to be rude but tell me if I’m doing something wrong. Cordless drilled my holes in the late winter early spring. Water poured out of every hole in the hickory tree I drilled. Installed my first bolt stood on it and the bolt sagged down so far that I couldn’t stand on it without falling off. Tried the second and third hole exact same thing. I’ve heard that you have to wait until after the growing season to drill holes because the trees are too soft. What good is that when you want to prep post season? In PA the growing season ends in June. I don’t want to go in the woods then scouting and prepping locations. I went and bought screw in steps.
I use a reflector tack near my first hole once bolt is in first hole I use my knee to locate the next hole just the same as when you first drilled the tree it's not so bad. Some put twigs in the first few holes.
Note..Always bring hand drill in case sap or water froze in hole.
Sent from my SM-G950U1 using Tapatalk
I was contemplated that same thing this year. How many bolts are guys using to get about 10-20?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
A 3/8 auger bit from home depot, with a few wraps of electrical tape to act as a depth gauge has been totally okay for me. You can't hold the bit perfectly still as you drill the tree, you always end up "hogging out" the hole when drilling. I've never had an issue getting my 3/8 bolts to slide right in. Don't over complicate things.