wrist strap release recommendations?

[raisins]

I'm still using my old release with pitted jaws and looking to replace before season starts.....what material does Scott use for their jaws?

not sure, but i've hunted a lot in the rain with scott releases and none have shown any sign of corrosion and work as well as the first day with them....also i was never careful with storage after a hunt (probably should change that) and probably left a few in wet jackets for a few days here and there

of course, florida is different

if i were in florida, i'd consider spraying the release down with CLP and working it into the internals and do this periodically

the idea that a few drops of a chemical is going to break a hunt doesn't affect me

i don't clean my saddle, platform, climbing system, ropes, and backpack each hunt....so i have smells all over me

 

[Weldabeast]

I oil my release with 3in1 oil periodically.
If a magnet doesn't stick it either stainless or aluminum

I was looking at the Scott echo....hopefully dropping a little more coin possibly last more than 2 seasons

 

[raisins]

I oil my release with 3in1 oil periodically.
If a magnet doesn't stick it either stainless or aluminum

I was looking at the Scott echo....hopefully dropping a little more coin possibly last more than 2 seasons

strong magnet did not stick to jaws of itty bitty goose (discontinued) or legacy

magnet did stick to the body of release weakly but that could be due to internals

magnet sticks strongly to hardware on strap, trigger post, and screws holding release body together

 

[Weldabeast]

strong magnet did not stick to jaws of itty bitty goose (discontinued) or legacy

magnet did stick to the body of release weakly but that could be due to internals

magnet sticks strongly to hardware on strap, trigger post, and screws holding release body together

Thank u sir

 

[MNFarmHunter]

I've been using a TruFire Edge since last summer and really like it. What I figured out, at least for me, is to use the trigger opposite of how you use a gun trigger. I started out using the tip of my finger, like a gun trigger, but once I got the new release with adjustable length, I shortened it as much as possible. That way, I don't get the trigger punch and instead have to move my entire finger movement. I significantly tightened up my groupings and can do better than 1" per 10y when I do my part.

I'll post a pic shortly showing how I use my release.

 

[MNFarmHunter]

Sent from my iPhone using Tapatalk

 

[woodsdog2]

I am trying out a Hot Shot Impetus. Basically it’s a lower cost version of the Spot Hogg Wiseguy and man I’m really liking this release. Big huge Allen screws to adjust for length with the teeth type arrangement. The strap is a high quality leather so far I’m really liking it. Just another option to consider. It’s like $30 to $40 less than the wiseguy.

 

[Plebe]

I’ve shot many, many wrist releases over the years. Benefits of working at An outdoors retail shop. For me, the non negotiables are wrist strap comfort and ease of use - I prefer Velcro. Next, the head has to swivel. Then, the strap (length of pull) needs to be adjustable. There are several great ones on the market, many of which have been mentioned above. If you have an archery shop nearby, try a few different ones and see what fits you best. Good luck!

Just browsing and dang releases have gotten expensive.

I don't know anything about what makes one release better than another other, but for me whats quoted above is essentially why I've been shooting a couple of entry level Truball releases for over a decade. I just looked at them, and they don't even say what model they are, there is just a patent number. But those releases address the same 3 features noted as important: 1. head swivels, 2. rigid post Adjustable length of pull, 3. Buckle wrist strap (my preference for repeatability). As well I find a fully closed on the string design to be my preference.

Adding to the model to model "who likes what" converstaion, anyone care to talk about specific construction and mechanics that make a release "better" or "best"?

 

[Bowtie747]

Just browsing and dang releases have gotten expensive.

I don't know anything about what makes one release better than another other, but for me whats quoted above is essentially why I've been shooting a couple of entry level Truball releases for over a decade. I just looked at them, and they don't even say what model they are, there is just a patent number. But those releases address the same 3 features noted as important: 1. head swivels, 2. rigid post Adjustable length of pull, 3. Buckle wrist strap (my preference for repeatability). As well I find a fully closed on the string design to be my preference.

Adding to the model to model "who likes what" converstaion, anyone care to talk about specific construction and mechanics that make a release "better" or "best"?

I’d say cheaper release use obviously cheaper metals. Wear out sears and springs fast maybe.

The main thing I’ve seen is trigger travel. Im pretty sold on Carter releases even in wrist. I use a like mike and it’s a close to a handheld trigger I’ve felt. I’ve shot it a ton and it still surprises me.

I compare it like something like a rifle trigger. Sure most triggers you can still shoot good but a solid trigger will result in better shots.

Also im not sure if price matters on this point but I think there’s more to the shape of a release than it seems. My Carter like mike allows me to be in better alignment on the string. It’s probably a tiny difference but I actually do notice it.

i went from shooting a 60$ Scott release which I still like but switched a Carter like mike and it did help my shooting.

Also I don’t like ridge releases it causes noticeable torque on the string. The floppy head types will reduce that if even a small amount.

of all the things we spend money on when it comes to hunting a few extra bucks on a release isn’t gonna hurt.It does really suck when you like your backup release to be the same as your main release.

 

[Horn]

Sent from my iPhone using Tapatalk

Any one else shooting like that? I think I'm going to give it a try

 

[cedar paul]

I can't add anything because I shoot directly off the string with either Fletch hunter or a Winn Archery freeflight. I have been tying all kinds of D loops, catfish and such and still detest them plus you can't see string wear under the loop. I can monitor my center serving and these 2 releases minimally wear the string.

 

[MNFarmHunter]

This is how I shoot my release. I tuck my thumb under my other fingers because I found that I got into a bad habit of indexing off of my thumb which would change my anchor point. I now use my pointer finger knuckle and press it into my jaw socket just below my ear. It’s a solid and repeatable index point.

When I draw back, my trigger finger is behind the trigger and use my wrist/wrist strap to draw. Once drawn, I then put my finger over the trigger and tuck my thumb. There’s more hand movement involved doing this but for me, it’s deliberate and forces me to slow down and think about everything.

By having the trigger higher up my finger, it also takes more finger travel to release which again for me is deliberate. It stopped me from punching the trigger and instead forces me to pull through.

Sent from my iPhone using Tapatalk

 

[DroptineKrazy]

I shoot the Trufire Hardcore and I've got no complaints. I like the hook as it makes it quick and easy to get on my d-loop.

 

[Horn]

Thanks for the rundown on how your sitting @MNFarmHunter, I'm going to try that out

 

[Jim DeSantis]

I shoot a Carter Quickie with back tension as John Dudley teaches. Big difference in a quality release.

 

[BuffaloBill]

I got a used B3 Hawk to try. Haven’t shot with it much yet but it has a crisp trigger. I did cut part of the “stem” off to shorten it. Couldn’t quite get my finger around the trigger.

 

[Plebe]

I’d say cheaper release use obviously cheaper metals. Wear out sears and springs fast maybe.

The main thing I’ve seen is trigger travel. Im pretty sold on Carter releases even in wrist. I use a like mike and it’s a close to a handheld trigger I’ve felt. I’ve shot it a ton and it still surprises me.

I compare it like something like a rifle trigger. Sure most triggers you can still shoot good but a solid trigger will result in better shots.

Also im not sure if price matters on this point but I think there’s more to the shape of a release than it seems. My Carter like mike allows me to be in better alignment on the string. It’s probably a tiny difference but I actually do notice it.

i went from shooting a 60$ Scott release which I still like but switched a Carter like mike and it did help my shooting.

Also I don’t like ridge releases it causes noticeable torque on the string. The floppy head types will reduce that if even a small amount.

of all the things we spend money on when it comes to hunting a few extra bucks on a release isn’t gonna hurt.It does really suck when you like your backup release to be the same as your main release.

lol, I'm not too worried about cost, I was just observing a big change in this market. I agree if something is better it's often worth a few extra quid.

I'm sure there are releases that are simply put, better than the rest. But I guess I haven't had the exposure.

I watched some release videos on Elk Shape and all I took away from them is certain users are more comfortable with certain designs, and many shooters panic at the shot, and there doesn't seem to be a magic trigger that fixes that.

Personally, I think I don't mind some creep in my archery trigger. Maybe I'm wrong here, but a crisp trigger seems prime for punching shots instead of "pulling" into them.

I get what you're saying about string (d-loop) torque from a rigid release, but would think all these handheld releases would really suffer then, no?

 

[bloodsoakedberber]

I used a spot hogg wise guy the last three years. I liked the open jaw for quick hook up.

 

[Robert loper]

hi all, I've tried to search but unfortunately release is a pretty common term, so apologies if this thread is super super redundant. I'm looking to replace my release- the one I got initially was a tru fire patriot, and it's too short (perhaps I got a junior version accidentally? who knows) anyhow it's going to be replaced before this next season starts up.

I don't want to change things up too much so planning on staying with a (right hand) wrist strap, caliper style release. exploring hinges and all that is a thing for a different time.

The scott shark, scott little goose, B3 alpha, and truglo nitrus releases are the most common i've seen reccomended online, but wanted to see if there were any opinions here before making a purchase, i don't have (or at least don't know of) any local archery shops to go in and ask, just stores like bass pro etc. (this is not a WTB outside of the classifieds, so for that type of reply please PM me instead of replying here).

Man i went with a thumb release last year snd god dam i love it. No strap is really sweet.

 

[woodsdog2]

I shoot the Trufire Hardcore and I've got no complaints. I like the hook as it makes it quick and easy to get on my d-loop.

That’s what I like about the Hot Shot Impetus it’s a hook . Never shot one before, I really like it better than a caliper style.