• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

LWCG Ambush Platform

I’ve been told they already have replacements ready based on some issues with the stands and sticks. The bolts they used passed stress tests. Sounds like they may also be rethinking the design - maybe something like the original versa button? Another post shows an image from LWCG with a platform using a button very similar to those used on the XOP stands.
 
tam9492 said:
I’ve been told they already have replacements ready based on some issues with the stands and sticks. The bolts they used passed stress tests. Sounds like they may also be rethinking the design - maybe something like the original versa button? Another post shows an image from LWCG with a platform using a button very similar to those used on the XOP stands.
Click to expand...
What do you mean by "they have replacements ready"? Are they going to be sending out replacement bolts? Do we need to contact LWCG?
 
okccj said:
What do you mean by "they have replacements ready"? Are they going to be sending out replacement bolts? Do we need to contact LWCG?
Click to expand...

Yes and yes. I don’t know what those replacements are, but they are aware of the two bent bolts.
 
I really think an AlumiButton with a grade 8 bolt would not bend. Hear me out ... the width of the button around the bolt would provide more surface area against the post preventing it from bending. I have no idea what I'm talking about but sounds like it would be strong enough without having to drill.
 
skyjacker said:
I really think an AlumiButton with a grade 8 bolt would not bend. Hear me out ... the width of the button around the bolt would provide more surface area against the post preventing it from bending. I have no idea what I'm talking about but sounds like it would be strong enough without having to drill.
Click to expand...
I hope you're right because that's what I plan to do. Happy I have a dano button and bolt laying around
 
How much does the platform weight without the strap? And has anyone tried it with a versa strap or Amsteel daisy chain?
 
Vtbow said:
It's kinda silly we have to replace a bolt on a $300 platform. Couldn't they have gone with the $3 bolt instead of the $1.50 one?
Click to expand...
Completely agree. If I didn't already know how much I appreciate a larger platform I'd be ready to send mine back for a refund.
 
tam9492 said:
I’ve been told they already have replacements ready based on some issues with the stands and sticks. The bolts they used passed stress tests. Sounds like they may also be rethinking the design - maybe something like the original versa button? Another post shows an image from LWCG with a platform using a button very similar to those used on the XOP stands.
Click to expand...
Maybe I'm ignorant to this, but what is your affiliation to Lone Wolf custom gear? When you say "you've been told", was it someone with some decision making ability at Lone Wolf custom gear who told you this? Additionally, will this be an across-the-board replacement, or will they only replace as contacted? Sounds to me like they're aware of a potential across-the-board issue.
 
huntin_addict said:
Maybe I'm ignorant to this, but what is your affiliation to Lone Wolf custom gear? When you say "you've been told", was it someone with some decision making ability at Lone Wolf custom gear who told you this? Additionally, will this be an across-the-board replacement, or will they only replace as contacted? Sounds to me like they're aware of a potential across-the-board issue.
Click to expand...

No affiliation whatsoever, so I don’t speak for them. I happen to know Brad Kuhnert. I also don’t want to turn this into a customer service thread. We’ve been down that road before on here. I can’t speak to how they’ll replace bolts, but they are definitely aware of a potential issue across the board.
 
Is it known how many units were produced in this initial offering?

Depending on numbers I see this going one of 2 ways.

1. Tethrd Predator Gen 1 method of replace as they break.

2. Mail out the questionable part for the user to replace.

What are the chances of a LECG recall and repair? Seems like the most costly and disruptive alternative. I would imagine a certain level of certainty of failure would have to be present to get that ball rolling.


Sent from my iPhone using Tapatalk
 
tam9492 said:
No affiliation whatsoever, so I don’t speak for them. I happen to know Brad Kuhnert. I also don’t want to turn this into a customer service thread. We’ve been down that road before on here. I can’t speak to how they’ll replace bolts, but they are definitely aware of a potential issue across the board.
Click to expand...
I understand and thank you for your answer.
 
iamcorey said:
Is it known how many units were produced in this initial offering?

Depending on numbers I see this going one of 2 ways.

1. Tethrd Predator Gen 1 method of replace as they break.

2. Mail out the questionable part for the user to replace.

What are the chances of a LECG recall and repair? Seems like the most costly and disruptive alternative. I would imagine a certain level of certainty of failure would have to be present to get that ball rolling.


Sent from my iPhone using Tapatalk
Click to expand...
I would imagine folks will start getting bolts in envelopes. Seems the easiest way to fix it.

Although, I will most likely be drilling mine to give the bolt more contact if I decide to keep it.
 
iamcorey said:
Is it known how many units were produced in this initial offering?

Depending on numbers I see this going one of 2 ways.

1. Tethrd Predator Gen 1 method of replace as they break.

2. Mail out the questionable part for the user to replace.

What are the chances of a LECG recall and repair? Seems like the most costly and disruptive alternative. I would imagine a certain level of certainty of failure would have to be present to get that ball rolling.


Sent from my iPhone using Tapatalk
Click to expand...

They could also redesign the post and just send the new post out. But they will probably just start with sending a new bolt out.
 
tam9492 said:
No affiliation whatsoever, so I don’t speak for them. I happen to know Brad Kuhnert. I also don’t want to turn this into a customer service thread. We’ve been down that road before on here. I can’t speak to how they’ll replace bolts, but they are definitely aware of a potential issue across the board.
Click to expand...

I've already sent LWCG two communications regarding the need for a new bolt to be overnighted to me. Haven't heard a word back yet
 
You must log in or register to reply here.
Back
Top