• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Anyone else using a schwabisch hitch on their tether?

This is my diy tender, using paracord and a little plastic ring I pulled off of an old pack I had. It's shown with a prusik here, but I've since changed that to a distel hitch on my lineman's belt and it works great- easy one-handed operation.
index.php
Here's my lineman's belt prusik tender. I found a couple of these metal dee rings on a tool bag I've got at work. A few minutes with a speedy stitcher, and I've got a great tender.20180914_225200.jpg
 
Probably a stupid question, but when you have the linemans belt around the tree, does the tender go on the side nearest you? Or the far side of the hitch?
 
I put mine closest to me. So when I pull to tighten it pushes the prusik along.

Sent from my LG-H831 using Tapatalk
 
Probably a stupid question, but when you have the linemans belt around the tree, does the tender go on the side nearest you? Or the far side of the hitch?
@cb750 is right. The tender goes on the tail end (closest to you). When you pull the tail , pull it out to the side and a little towards the tree. The tender will slide up the tail, pushing the prusik along. Then, to lengthen the belt, just use your thumb and forefinger on the top of the prusik to slide it down. Completely one-handed operation. Actually, I'll post a super short video demonstrating how it works, for visual learners, like me.
 
Thanks for posting that video. Pictures are worth a 1000 words, videos much more. My brain was having a hard time comprehending what the tender was used for. To many mosquitoes in the woods yesterday.

Can you use one of thes on your tether? If so, what is the preferred knot to use? Currently using a prussik and it was loading up, hard to move after being weighted. Thanks for the info.
 
Thanks for posting that video. Pictures are worth a 1000 words, videos much more. My brain was having a hard time comprehending what the tender was used for. To many mosquitoes in the woods yesterday.

Can you use one of thes on your tether? If so, what is the preferred knot to use? Currently using a prussik and it was loading up, hard to move after being weighted. Thanks for the info.
No problem. Yes, you can use one on your tether. The schwabisch or distel hitch would probably be best for most folks. They're really easy to tie, and don't bind nearly as badly as a prussik, especially the distel.
 
Thanks for posting that video. Pictures are worth a 1000 words, videos much more. My brain was having a hard time comprehending what the tender was used for. To many mosquitoes in the woods yesterday.

Can you use one of thes on your tether? If so, what is the preferred knot to use? Currently using a prussik and it was loading up, hard to move after being weighted. Thanks for the info.
One more thing:
Notice the way I was pulling the tail back towards the "tree". If you pull it straight back, it doesn't work as easily. Pull to the side, or back towards the tree. Give it a shot, and you'll see what I mean. Remember, the slack tender never sees any load. It does not need to be load bearing. I've used a key ring before.
 
Last edited:
One more thing:
Notice the way I was pulling the tail back towards the "tree". If you pull it straight back, it doesn't work as easily. Pull to the side, or back towards the tree. Give a shot, and you'll see what I mean. Remember, the slack tender never sees any load. It does not need to be load bearing. I've used a key ring before.

Thanks, I will have to give it a try.
 
How much line do you need to have to tie the distel? I have several prusick knots on lifelines that are not being used.... Hoping I can use one of those and not have to order more rope...

Sent from my Moto Z (2) using Tapatalk
 
How much line do you need to have to tie the distel? I have several prusick knots on lifelines that are not being used.... Hoping I can use one of those and not have to order more rope...

Sent from my Moto Z (2) using Tapatalk
The prusik cord that comes with Tethrd lineman's belts is about 47" long. I retied it into a schwabisch, which uses the same amount of line as a distel, and trimmed 12" off of it. I tied the ends into double fisherman's knots to attach to carabiner.
 
How much line do you need to have to tie the distel? I have several prusick knots on lifelines that are not being used.... Hoping I can use one of those and not have to order more rope...

Sent from my Moto Z (2) using Tapatalk

I used the cord that was used for the Blake’s hitches on the original kestrel for my Distel hitches. No clue how long those are, but on each, I used halyard hitches to attach to the carabiner, and it was still plenty long for the Distel Hitch.
 
quick question, What Knot is better or works easier on the Tether? So, If I have been using the Prusik, are any of these other ones better? Do you need a tender on the tether? I just tried the schwabisch on my linesman belt, and will be using that one with a tender. Would you want a tender on your tether as well?

thanks for the help
 
I'm guessing some guys use the tender on their tether but i can use two hands with my tether so I'm not worrying about it. I just made one for my linemans belt for one hand adjustment. I like the prusik but i have not tried any other knots yet.


Sent from my iPhone using Tapatalk
 
quick question, What Knot is better or works easier on the Tether? So, If I have been using the Prusik, are any of these other ones better? Do you need a tender on the tether? I just tried the schwabisch on my linesman belt, and will be using that one with a tender. Would you want a tender on your tether as well?

thanks for the help
Yes, you can use another friction hitch on your tether. In fact, you can use a schwabisch, just like your LB. I use a tender on my tether, as well, allowing me to tighten it, if necessary, while holding my bow/rifle/range finder/grunt tube in one hand. I REALLY don't like a standard prusik because I'm heavy. I have to loosen and redress it too often. A schwabisch or distel handle the load better with less binding. There are lots of friction hitches that work well, these two are just easy to tie and fairly compact.

Sent from my LGMP450 using Tapatalk
 
Fooled around with this a little tonight. In your video you're never really putting much weight on the hitch. How well is the tender working after you really set some weight into it? I tried it for my tether and after I set that hitch good I wouldn't be able to budge it with the tender.
 
I messed with mine today on a tree at ground level and it seemed to work well.

Sent from my Moto Z (2) using Tapatalk
 
Back
Top