Wow, that is something. Good shooting brother750gr here. 31” Sirius Apollo 250 with 100gr half jacket system and 200gr Abowyer SB, lighted nock, 3 Super Saber vanes. Elite Remedy 62#. I am completely happy with what it does and since I have yet to even look at anything over 20yards i have only tuned to 30. Here is the exit of the buck I shot this year Was qtr away so I split the 2nd to last rib and came out the offside should as you can see , 17yrd shot ran 20 yards dropped dead
View attachment 95264View attachment 95265
Don't you have a WB on there as well?? Can't remember if that was you.650gr Grizzlystiks. 200gr Samurai. Full length. 30.5” draw V3X @70#.
I shoot 650 grain grizzlystik pushing a Simmons 175 gr head. Hoyt Ventum pro 33 @ 70 lbs.
If I could put the weight anywhere without affecting flight, it would be point weight. More weight, in the same style head, makes a more durable head. I would tinker with point weight before I tried weight tubesNice group of guys shooting "beast mode" arrow setups.
I'm considering bumping up a few grains to get well into the 600 or 700 grain area. All I may have to do is add some 5 GPI weight tubes to my current arrow setup and go with a 200 gr. broadhead. The weight tube alone would add 120 grains. Using a 200 gr. tip weight would add another 50 gr. to my FOC. This would put my arrow setup in the 670+ range.
I'm using a 300 spine, so I have some room to play with tip weights, before I have to worry about the spine breaking down. Weight tubes wouldn't break the spine of the arrow down, rather it would just add weight.If I could put the weight anywhere without affecting flight, it would be point weight. More weight, in the same style head, makes a more durable head. I would tinker with point weight before I tried weight tubes
I was eyeing 300 grain til some 250's came up in the classifieds for cheap. One day I may try to go up to 300 grain single bevels stillI'm using a 300 spine, so I have some room to play with tip weights, before I have to worry about the spine breaking down. Weight tubes wouldn't break the spine of the arrow down, rather it would just add weight.
Just the same, I tend to agree with you. Plus, I've always wanted to shoot a 300 gr. single bevel broadhead.
The above knucklehead uses a WB as well. In fact, I’m pretty sure he uses a WB that’s put on backwards, lol
Plus, I've always wanted to shoot a 300 gr. single bevel broadhead.
I will say it is pretty cool watching them fly and knowing that there isn’t much stopping it including you Block Target or your new cedar fence.I was eyeing 300 grain til some 250's came up in the classifieds for cheap. One day I may try to go up to 300 grain single bevels still
Sent from my Pixel 3 using Tapatalk
Yeppers...both. The 200 gr. flies okay, but there's a little side kick to the flight. The 250 gr. breaks the spine down just enough to smooth out the flight to perfection.
I met a guy at a traditional only draw it hunt shooting near the same rig with a different riser.I built a "tank" arrow for my ILF recurve. I have a Hoyt Satori 19" riser with Uukha Gobi short limbs at 45#. The super curl design on these limbs will really fling an arrow. My standard arrow is a Gold Tip Traditional 500 spine, at 29" with a 250 gr. tip weight and 3" feathers. This has a 540 TAW with 23% FOC.
However, the "tank" arrow is a Gold Tip Traditional 400 spine, at 29" with 250 gr. tip weight, 100 gr. internal weight (FACT System Weights) and 4" feathers. This arrow has a TAW of 665 and a 26% FOC. The "point on" for this arrow is 20 yards, any distances after 20 yards is a serious hold over, so I keep my shots inside 15 yards. It hits like a freight train.
View attachment 95352