Re: RE: Re: DIY strap on steps
The major diameter is 9.6 mm and the smooth shank is 8 mm.
Sent from my SM-G900V using Tapatalk
kenn1320 said:Erniepower said:Yep just got back from the hardware store. Couldn't find a counter sink in 8 so I grabbed stainless. The original is a metric lag screw, Not sure what size, but I'll measure. I couldn't fit a 3/8" screw when I tried.
Sent from my SM-G900V using Tapatalk
Well they dont make a 9mm and 5/16" is about the same as an 8mm. 3/8" = 9.5mm so 10mm wont work either. Looks like 5/16" it is, just keep your eye on it. Use a loc nut and if you find they need tightening after some use, they are likely stretching or the step is denting. Dont over tighten them. :shock:
The major diameter is 9.6 mm and the smooth shank is 8 mm.
Sent from my SM-G900V using Tapatalk