@Brocky I used this last evening and WOW! This is my new go to hitch. I was using a Mich and it was not easy to use with OPLUX and TRC for me at least. This 'Happy Hands' is awesome. Thank you for sharingThe Happy Hands is Distel like, but breaks easier. A small double eye would get rid of the metal ring.View attachment 72632
If you did the happy hands but used scaffolds like in post 132, would it tend ok in that configuration?The Happy Hands is Distel like, but breaks easier. A small double eye would get rid of the metal ring.View attachment 72632
This is the video I’m talking about at the 7:30 mark. Would the Klemheist do the same thing with the hollow block setup?For the hollowblock, my favorite hitch is a klemheist.
Sent from my iPhone using Tapatalk
This is the video I’m talking about at the 7:30 mark. Would the Klemheist do the same thing with the hollow block setup?
Yes it will work, in fact, keep one of the Scaffold tails long and make the Very Happy Hands, it shows seizing for the one eye because that was how it was originally presented on the UK arborist forum Arb Talk.If you did the happy hands but used scaffolds like in post 132, would it tend ok in that configuration?
8mm hitch cord would be a good choice for that size of rope, some arborists even use 10mm for easier releasing. Arbsession has some nice ones, the Tendon Timber being fairly cheap if buying by the foot. EWO has a sewn Sterling Flex, but then the set length might limit which hitches can be tied. Woodhuntingsaddles has shorter Bluewater VT that are very good, also.Where would be a good place to buy cord to tie different style hitches like these you all are showing? What is the cord called also I’ll be using the camo predator rope to tie them on. Thanks and God Bless
Any hitch that will hold can be used above the fig. 8. The video posted shows the wrong way to put the rope through the fig. 8, the bight should go over the top first, then through the big hole, easier for the rope to slip around the big eye and form a girth hitch if done as shown.Possibly a dumb question but,
I have a hallow block and I have a figure 8. I was going to see if I could attach the hollow block above the figure 8 with 4 wraps. Would this work and be safe? I’ve seen some people use a schwabisch hitch.
Seriously. Their's gold in them thar hills!Look at that enormous stack of hitch/knot drawings. I'm bringing my photo copier over.
Yes it will work, in fact, keep one of the Scaffold tails long and make the Very Happy Hands, it shows seizing for the one eye because that was how it was originally presented on the UK arborist forum Arb Talk.
View attachment 73096
Makes it easier to release only.Is this for an option so you don’t need a ring or something else to tend the hitch for you?
I asked him about that because I have 6mm TRC on hand but I do not have any eye to eye hitch cords. Based on the configuration of that hitch I felt like scaffolds would work and tend but figured he knew the answer for sure.Is this for an option so you don’t need a ring or something else to tend the hitch for you?