-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
How are you getting deer in your truck when solo?
- Thread starter Spartan
- Start date
I’m not in the Midwest so not really a problem. A big buck in the area I whitetail hunt is ~200 pounds live weight.
If I was solo and shot one big enough to be an issue I’d probably just bone it out where it lays. I do this at times anyway. All the really big animals I hunt (elk etc.) are boned out and packed out.
Sent from my iPhone using Tapatalk
If I was solo and shot one big enough to be an issue I’d probably just bone it out where it lays. I do this at times anyway. All the really big animals I hunt (elk etc.) are boned out and packed out.
Sent from my iPhone using Tapatalk
I ran into a problem a few years back trying to wrestle a heavy buck into the bed of my pickup. After an all day sit I shot him at last light then made the 3/4 mile hike back to the truck to drop off my gear and retrieve my 2 wheeled cart. Add the walk back to get him and the tiresome haul out and I was spent. I damn near killed myself struggling every which way to get his fat azz up into the bed but I couldn't. Completely exhausted and totally drained of energy I called my family to bail me out. Luckily I was only 20 minutes from home. I realized at that moment that I'm not as young or strong as I used to be so I have to be smarter, especially if I'm hunting far away places. Lesson learned the hard way.
Nowadays I pack my deer out unless it has spots.
Nowadays I pack my deer out unless it has spots.
Another vote here for packing them out! Unless I'm in a situation where it's a short drag to a motorized vehicle; I quarter them in the field and pack them out. Much easier to manage when you're solo, especially when you double up.
I shot a big one last fall in velvet and I couldn’t muscle him into my truck no matter how hard I tried and I’m not a small guy. I finally lashed him with his head off the ground and got him down to the neighbors for some help. I saw a guy on YouTube somewhere had a hoist system that features a one way ascender device like a rope man 1 to take up slack as you slowly lift and pull the deer up. I rigged up the heavy duty metal cam jam to do the job but haven’t tested on a deer yet
I have done that before and I carry a 2x10x6' in the truck and slide the deer up and in. No problem so far.
I agree packing them out is easier. Ive done it a few times where I absolutely could not fathom doing a cart or sled. However, our 3 giant breed dogs eat all the bones and non desirable meat of these deer so it's pretty important that I get the entire carcass out of there. I have a roof rack on my tacoma and I just thread a come along up above the last bar and attach to deer. Slowly ratchet up until the center of mass is above my tail gate and then push him on in. Once I get home I have another come along rigged up on a big tree branch. just drive the truck under the tree, attach the other come along and ratchet him up to skinning height.
If there's a hill around drop the gate and back up to it. Slide the deer in.
On flats, I'm still able to pull the buck up enough to rest it's shoulder on the edge of the bed, back up, and haul it in with a second move. That's how the Benoits do it, and it works pretty well over trying to haul it in on one move.
I used to put them on top of a sedan, that was a pain in the ass.
On flats, I'm still able to pull the buck up enough to rest it's shoulder on the edge of the bed, back up, and haul it in with a second move. That's how the Benoits do it, and it works pretty well over trying to haul it in on one move.
I used to put them on top of a sedan, that was a pain in the ass.
- Oct 15, 2018
- 769
- 897
- 93
- 36
- LOCATION
- Warren County, PA
Same. More and more I am just packing them out.
Any more though I have my subaru with a hitch carrier instead of my truck as well.
Use your rappel setup to either hoist the deer up (if you have a 10' branch around), you could even use the truck to do the lifting lol; then back under and lower the deer.
The method that I currently use (if not deboned and packed out) is to attach one of my ropes to my Back Rack (and the mid-point or other end to the deer) and use either a CT RollNLock or prussic setup as a capture/mechanical advantage system
The method that I currently use (if not deboned and packed out) is to attach one of my ropes to my Back Rack (and the mid-point or other end to the deer) and use either a CT RollNLock or prussic setup as a capture/mechanical advantage system
i might get a pulley and splice a largish amsteel loop through the attachment loop of the pulley
this loop can be girth hitched on the deer anywhere (like the neck) so your deer has a pulley on it now
then have another pulley mounted to the back of the bed near cab
tie rope to back of bed, route through pulley attached to deer, route through pulley attached to bed....you now have 3 X mechanical advantage....like our venerable trucker's hitch....and can guide deer and pull rope at the same time
this loop can be girth hitched on the deer anywhere (like the neck) so your deer has a pulley on it now
then have another pulley mounted to the back of the bed near cab
tie rope to back of bed, route through pulley attached to deer, route through pulley attached to bed....you now have 3 X mechanical advantage....like our venerable trucker's hitch....and can guide deer and pull rope at the same time
I have a jet sled which lives in my truck bed to organize gear. When I get a deer I use it to drag the deer out. Bring it to the truck and use a foldable ATV ramp to just pull it in.
