ethanhogan
Member
- Joined
- Oct 9, 2019
- Messages
- 94
Anyone running the oplux ropes and long duck from wild edge? Yay or nay? Should I just get the reg setup from tethrd and run RM1’s
I'm curious where you hear 4kn on the duck? Cause I've looked everywhere and found no specs at all on it. Which is why I went with ropeman2 and a ct rollnlock instead.Oplux is good to go but I personally stuck with a prusik avoid mechanical stuff if possible. The kong it only good to around 4kn from what I’ve seen so no go for me. Get some Oplux and a beal jammy and a Kong mini figure 8 from DanO for tender
It's in this thread. Which appears to reference this manual and is image 4.2.I'm curious where you hear 4kn on the duck?
That's the manual for the ctrollnlock.It's in this thread. Which appears to reference this manual and is image 4.2.
Don’t go with the tethrd ropes. They are great products and a great company but they are very bulky and heavy. You can fit two or three oplux ropes in the same pouch that will only hold one tethrd rope. An the oplux is a lot lighter. I wish I would have went with the oplux to begin with. The tethrd ropes are like a lock on compared to a saddle.Anyone running the oplux ropes and long duck from wild edge? Yay or nay? Should I just get the reg setup from tethrd and run RM1’s
Is a beal jammy the same as a pruisk? Does it work the same?Oplux is good to go but I personally stuck with a prusik avoid mechanical stuff if possible. The kong it only good to around 4kn from what I’ve seen so no go for me. Get some Oplux and a beal jammy and a Kong mini figure 8 from DanO for tender
Yes they can be tied in several friction hitches like a prusik. Im looking to sell the grey 50cm I have.
Sent from my iPhone using Tapatalk