Points for Stump Shooting

[Arkie]

What points is everyone using for stump shooting?
I’m shooting 200 grain field points & broadheads so I was hoping to buy some 200 grain blunt points, but haven’t seen any online at my usual go-tos.


Sent from my iPhone using Tapatalk

 

[milunchbox]

EthicsArchery.com

 

[Arkie]

EthicsArchery.com

And of all places I buy things, I left this one out.
Wish they were able to ship quicker, was hoping to do some stump shooting next weekend. Went ahead ordered a pack anyway.

Thanks for sharing.


Sent from my iPhone using Tapatalk

 

[Razorbak66]

Rubber blunt you can slip over your field point. Works in a jiff

 

[Razorbak66]

Or slip a larger washer and screw field point in between washer and shaft

 

[Arkie]

Or slip a larger washer and screw field point in between washer and shaft

Ah… I’ll use this until mine come in.


Sent from my iPhone using Tapatalk

 

[Nutterbuster]

Who is Stump and how bad do you want him hurt?

 

[Still Kicking]

I used to drill out wooden thread spools and epoxy them on my wooden arrows. They smacked hard enough to drop squirrels and rabbits too.

 

[GCTerpfan]

Ah… I’ll use this until mine come in.


Sent from my iPhone using Tapatalk

Or if you don't want the field point on the end buy an allen bolt to fit your insert threads and add 200 gr worth of washers.

 

[Allegheny Tom]

11/32" Judo glued on a steel adaptor. Comes out to about 215 grains. I grind off the very tip of the Judo and it ends up right at 200gr. I've killed 6 groundhogs this summer with that tip.

 

[DB4x4]

Who is Stump and how bad do you want him hurt?

Not sure, but sounds like he got shot in the leg...

 

[Petrichor]

200 grain ace hex heads.

 

[esta4d]

Ace Hex heads. Great for stumps and devastating on small game. Easily sharpened with a 1/2" drill bit and a file.

 

[jered]

Another vote for ace hex heads!

 

[Mr Price]

If you have standard carbon arrows. This works great!
Using the scale to get your total up front weight (field point and insert).
Then take your grain scale to your local hardware store and weight out different length of 6mm bolts to get the correct weight. Then glue them in.

 

[Weldabeast]

Or if you don't want the field point on the end buy an allen bolt to fit your insert threads and add 200 gr worth of washers.

8/32

 

[Heydeerman]

Ace Hex heads. Great for stumps and devastating on small game. Easily sharpened with a 1/2" drill bit and a file.

I’d like to see how you do this.

 

[esta4d]

I’d like to see how you do this.

Put the hex head in a vice and use a 1/2 drill bit with a drill of course. It will clean up the concave shape then I use a file to remove the burr on the outside.

 

[JoyRyd]

I tried the Washer suggestion: Outstanding!!
I used the lightest nylon washers I could find that fit the field points. These are cheap and very effective! Thank you @Razorbak66


Sent from my iPhone using Tapatalk

 

[Arkie]

Received my blunt points in from Ethics earlier this week. I took the afternoon off and walked around the woods for about an hour stump shooting. This was certainly the most fun & relaxing practice I’ve had shooting the stick bow so far. Very cool and realistic picking out random stumps, branches, or leaves at unknown distances and shooting.


Sent from my iPhone using Tapatalk