• The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
  • We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules

Anyone know where I can get the tethrd Onestick or Skeletor's attachment tab?

HuumanCreed

Well-Known Member
SH Member
Joined
Aug 21, 2020
Messages
1,563
Location
Westminster Maryland
That square looking button that you cross the amsteel rope to. Or know what its actually call? Or something similar to that? I want to try it but don't want the whole stick.
 

enkriss

Well-Known Member
SH Member
Joined
Sep 13, 2018
Messages
4,094
Dynalock tab. They won’t sell them separate. I already asked.

Can try to make your own. I saw someone was experimenting on FB with a peice of Aluminum with slots cut in and filed smooth.
 

iamcorey

Well-Known Member
SH Member
Joined
Oct 24, 2018
Messages
2,495
Seems like something that would be easy to make/imitate. Even easier if you already making squirrel steps...hint...hint.
 

GCTerpfan

Moderator
Staff member
SH Member
Joined
Aug 11, 2017
Messages
4,613
Location
Garrett County, MD
Hmm....I have one! Going to try that. What diameter have you try that works?
Diameter for amsteel? That's 1/4" in the pic and all that I have tried that way.

The first wrap is pretty easy, then I give it a half twist and loop around the other end. This would probably hold but, I always give one more wrap around the end I started on. The last wrap requires you fish the end of the line under the loop but, it becomes second nature after doing it a few times. I think it will make sense when you try it.
 

drew13

Well-Known Member
Joined
Sep 11, 2014
Messages
1,042
Location
Maine
I made one by cutting a rectangle out of a piece of 4” pvc pipe. Dremel out the grooves, sand all the corners and attach to stick with a bolt through the center. Seems to work fine. Use this idea at your own risk.
 

Bdwilliams

Well-Known Member
Joined
Jul 20, 2018
Messages
238
Thanks for all the good reply everyone. I actually discovered one method that I think is amazing based on ideas that came from this!
What's the method? That attachment is the slickest thing about those sticks.
 

HuumanCreed

Well-Known Member
SH Member
Joined
Aug 21, 2020
Messages
1,563
Location
Westminster Maryland
What's the method? That attachment is the slickest thing about those sticks.
 
Top