Ugh, orange peel.. Good luck!I must have mixed the stuff incorrectly or i should have checked the expiration of the hardener.....exterior coat isn't curing.......i was thinking to myself it was going too easy for my first try.... Sand it back down and try again.
View attachment 20857
That’s the color of the water down there anyway so it’ll be good camouflage!!Horrible selection at the hardware store...... The only earth tone oil based flat paint they had was turd brown. Not what I was hoping for but I guess a 16ft turd is better than none at all
2" clear vinyl hose works good. Slit one side and slip over, really sound proof. Truck Cap Tape works well too. 2" wide and stick over top of gunwhaleI concur. My old fiberglass which might be a Mohawk has those aluminum gunwales and we have to cover them with pipe insulation on our canoe hunts. Leaning your shotgun against the aluminum is noisy and scratches your gun up.
So your saying roll from top to bottom and brush strokes going down the length?Tip and roll. Good candy stripe roller vertically, followed immediately after with a high quality bristle brush perpendicular to the roller pattern to kill the lines and release any bubbles. Always maintain a wet edge on the brush.
You got it. Looks like whatever you did worked great!So your saying roll from top to bottom and brush strokes going down the length?