ThereWillBeSpuds
Well-Known Member
- Joined
- Nov 12, 2019
- Messages
- 648
Working on a Semi-light weight plywood leaner platform. This is my first prototype.
Kitchen Scale says it weighs 1lb 11oz, its 16 inches wide by 10 inches deep. I made it from 1/2 inch cabinet grade plywood I had left over in my shed. It attaches by camming over.
It needs a little rattle can love and some stealth stripping, but I like where this is going. I haven't had a chance to get in the saddle and jump around on it, because I am nursing a shoulder injury, but it seems pretty solid on the tree to me, both with down pressure and sideloading.
Kitchen Scale says it weighs 1lb 11oz, its 16 inches wide by 10 inches deep. I made it from 1/2 inch cabinet grade plywood I had left over in my shed. It attaches by camming over.
It needs a little rattle can love and some stealth stripping, but I like where this is going. I haven't had a chance to get in the saddle and jump around on it, because I am nursing a shoulder injury, but it seems pretty solid on the tree to me, both with down pressure and sideloading.