Yes...I have ADD...
Love the idea of the LW Pocket Arm, but cant bring myself to pay $250...so I'm going to take a stab. Not sure how this will go. Material is not a problem, but cutting it is. I'll video the shenanigans...
Parts list:
1ea 4"x6" 5/8 thick 6061 plate
1ea 2"x12" 5/8 thick 6061 bar (bottom arm)
2ea 1 25"×10" 5/8 thick 6061 bar (2 outer arms)
1ea 6" 5/16x18 all thread with knob (tree brace adjustment knob)
1ea bolt for fluid head mount
3ea 2.5" 5/16 x18 bolts with washers and lock nuts for arms
1ea 3" 5/16x18 with lock nut and washers for arm/base mount
A variety of nylon/dacron washers
Got the design done and transformed to the plate for the base. I'm going to focus on that first.
Simplifying things a bit. No hook.
Sent from my SM-G950U using Tapatalk
Love the idea of the LW Pocket Arm, but cant bring myself to pay $250...so I'm going to take a stab. Not sure how this will go. Material is not a problem, but cutting it is. I'll video the shenanigans...
Parts list:
1ea 4"x6" 5/8 thick 6061 plate
1ea 2"x12" 5/8 thick 6061 bar (bottom arm)
2ea 1 25"×10" 5/8 thick 6061 bar (2 outer arms)
1ea 6" 5/16x18 all thread with knob (tree brace adjustment knob)
1ea bolt for fluid head mount
3ea 2.5" 5/16 x18 bolts with washers and lock nuts for arms
1ea 3" 5/16x18 with lock nut and washers for arm/base mount
A variety of nylon/dacron washers
Got the design done and transformed to the plate for the base. I'm going to focus on that first.
Simplifying things a bit. No hook.
Sent from my SM-G950U using Tapatalk