Gen 3 One Sticks....

[Weldabeast]

The roll pins never gonna fail....the tube or "6061" step/standoff gonna break first

 

[Plebe]

The roll pins never gonna fail....the tube or "6061" step/standoff gonna break first

Apparently they forgot to install roll pins on some of the Gen 1 sticks.

 

[Weldabeast]

Wow...I didn't know that

 

[Plebe]

Wow...I didn't know that

It appears they are making progress, if the inspection stickers are indicative of actual meaningful QA and not just salesmanship.

But yeah...that's the apparent explanation for this Gen 1 event. And one member mentioned his was missing a roll pin as well.

 

[TK161BOONER]

It appears they are making progress, if the inspection stickers are indicative of actual meaningful QA and not just salesmanship.

But yeah...that's the apparent explanation for this event. And one member mentioned his was missing a roll pin as well.

View attachment 72887

I’m pretty sure you are taking about a rivet on the back of the Dynalock not a roll pin.

 

[Plebe]

I’m pretty sure you are taking about a rivet on the back of the Dynalock not a roll pin.

I'm sure you're right. Did they do a safety notice or recall for that?

If that's the case, I don't know why we're worrying about a roll pin when the stick is held to the tree by a rivet.

 

[TK161BOONER]

I'm sure you're right. Did they do a safety notice or recall for that?

If that's the case, I don't know why we're worrying about a roll pin when the stick is held to the tree by a rivet.

Not that I’m aware of.

 

[enkriss]

I'm sure you're right. Did they do a safety notice or recall for that?

If that's the case, I don't know why we're worrying about a roll pin when the stick is held to the tree by a rivet.

I heard they beefed up the rivet on these gen3s

 

[Plebe]

I heard they beefed up the rivet on these gen3s

 

[Dillon914]

Just got the Gen3s and it seems like they open the box, test then repackaged them. I’m coming from lone wolf sticks so these obviously feel crazy light but time will tell if they will hold up. They will need some stealth tape to keep them quiet.

 

[Hunter260]

Just saying .....u trust roll pins every day if u drive anywhere

No I swapped every roll pin in my truck with grade 8 bolts from tractor supply

 

[Weldabeast]

No I swapped every roll pin in my truck with grade 8 bolts from tractor supply

Should be just fine as long as u used fine thread bolts and loctite....

 

[Hunter260]

Should be just fine as long as u used fine thread bolts and loctite....

……. I gotta go unbuild my truck tomorrow and apply loctite to every bolt now

 

[enkriss]

Can’t wait to try them out to see if they wobble.

 

[cincyprostheticguy]

……. I gotta go unbuild my truck tomorrow and apply loctite to every bolt now

Crossthreading is free loctite

 

[bigmike23]

Can’t wait to try them out to see if they wobble.


View attachment 72993

Uncle Lou have a new color??

 

[enkriss]

Uncle Lou have a new color??

Yep… gray

 

[Hunter260]

Crossthreading is free loctite

Someone told me one time if you turn a cross threaded bolt hard enough it’ll jump back over on the threads

 

[bowhuntr09]

Judging by the fact that these haven’t sold out yet I think is a good indication of the damage the recall has done to their business. I don’t think Gen 1 or Gen 2 stayed in stock more than a couple days.

 

[enkriss]

Judging by the fact that these haven’t sold out yet I think is a good indication of the damage the recall has done to their business. I don’t think Gen 1 or Gen 2 stayed in stock more than a couple days.

You having a hard time getting these buggers apart? The pins seem super tight.