Sub 1lb CF/Au stick

[Crcusmonky]

I took a stab, I almost put both, but thought at the weight it couldn’t be. Clearly, it can!


Sent from my iPhone using Tapatalk

 

[Fozzy317]

Close. It's the 12" raptor:
https://www.huntingbeastgear.com/products/beast-gear-raptor-12-stick-platform

Even better! That's pretty impressive that you got the weight that low with such a large step

 

[358]

Can you share the Stl for the top piece?

Found it:
https://saddlehunter.com/community/index.php?threads/t-top-for-climbing-sticks.56710/

 

[cibor]

“Alone Carbon Fiber laminates and Aluminum are both highly resistant to any form of corrosion. But when the materials are paired together on mating surfaces having physical contact, galvanic corrosion can quickly affect those surfaces and later cause accelerated corrosion most commonly in the aluminum but can also degrade the carbon fiber composites.”

Source: https://compositeenvisions.com/document/galvanic-corrosion-carbon-fiber-and-aluminum/

 

[Samcirrus]

“Alone Carbon Fiber laminates and Aluminum are both highly resistant to any form of corrosion. But when the materials are paired together on mating surfaces having physical contact, galvanic corrosion can quickly affect those surfaces and later cause accelerated corrosion most commonly in the aluminum but can also degrade the carbon fiber composites.”

Source: https://compositeenvisions.com/document/galvanic-corrosion-carbon-fiber-and-aluminum/

There is a simple test to know if you will ever have galvanic corrosion....a continuity test. After you bond or bolt the two together, if there is any electrical connection there will be galvanic corrosion.

 

[cheecho67]

Not under a pound but even a one-stick under 2 or 2.5 would be awesome. My converted Muddy Pro one-stick comes in at 4 pounds 5 ounces with the amsteel rope and a 2 step amsteel aider.

View attachment 95492

where did you get the top platform at??

 

[Crcusmonky]

T-top for climbing sticks

I've received a few questions about the topper of my lightweight one-stick I posted in another thread, so I thought I'd post some info on it here. In an effort to lighten my one-stick and reduce bulk, I've developed a minimal step/standoff using a 5/16" diameter bolt with a 3D-printed cover. I...

saddlehunter.com

Sent from my iPhone using Tapatalk

 

[woodsdog2]

Mine’s a converted Muddy Pro as well with an EWO UP on top and an EWO ULS on the bottom. 4.4 lbs.