- Joined
- Dec 25, 2015
- Messages
- 5,258
or just eliminate the bottom step. Shorter tubing and a step longer aider.....go aider directly to top step. cuts weight and packing issue
Interesting idea
Sent from my iPhone using Tapatalk Pro
or just eliminate the bottom step. Shorter tubing and a step longer aider.....go aider directly to top step. cuts weight and packing issue
This was talked about in another thread it would save some weight.or just eliminate the bottom step. Shorter tubing and a step longer aider.....go aider directly to top step. cuts weight and packing issue
Ricky,I’m waiting on my machinist to get his CNC up and running at the moment. I have tried several different machine shops locally they cannot touch his price.
I will let you guys know when he is back in business
Sent from my iPhone using Tapatalk
Yes sir without a doubt they would fit. I would have to tell the machine shop they were for the 1/4 -20 bolt on the lone wolfs instead of the 5/16-18 on the Muddys. It wouldn't be a problem (when He gets up and running). You wanting the double step? I'm not sure what the single lone wolf step weighs so I cannot tell you how much more it will weigh (I'm assuming my double steps are heavier than the lone wolf single steps) @Ontarionfarmer can tell you for sure He is the official weights and measures . They are leaps and bounds more comfortable being double vs single steps.Ricky,
Will your steps fit on Lone Wolf sticks using the standoff bolts? I'd like to cut my LW sticks to 24" and use two of your steps per stick. Any thoughts?
Thanks,
Bill
or just eliminate the bottom step. Shorter tubing and a step longer aider.....go aider directly to top step. cuts weight and packing issue
Yes sir without a doubt they would fit. I would have to tell the machine shop they were for the 1/4 -20 bolt on the lone wolfs instead of the 5/16-18 on the Muddys. It wouldn't be a problem (when He gets up and running). You wanting the double step? I'm not sure what the single lone wolf step weighs so I cannot tell you how much more it will weigh (I'm assuming my double steps are heavier than the lone wolf single steps) @Ontarionfarmer can tell you for sure He is the official weights and measures . They are leaps and bounds more comfortable being double vs single steps.
Like a WE Stepp! Lol
But a single step requires 2 bolts, and a double only the 1.By memory a lone wolf step is about 60 g. A double step is 88 g.
You could put a single step on the bottom and a double on top. They would pack well that way
Sent from my iPhone using Tapatalk Pro
We are all different with different situation. We steps rock for some saddle hunters. I keep trying to like them and will keep trying until I sell them
Sent from my iPhone using Tapatalk Pro
I'll take a picture next week. Still busy....How are you all planning to pack your fixed step sticks in? I got my hands on my first fixed step sticks last weekend and found the packability to be a potential concern.
Any insight as to the best way to maneuver through the bush?
This is what I did last year too, until it got cold enough that I started using a pack. Then I stuck them in the stick talons on my platform and lashed to the outside of the pack. Worked, but wasn't elegant or super stable. With the shoulder sling it's fine until you gotta walk through weeds, tall prairie, or brush.I just us a shoulder sling and keep the sticks pointing forward. For now.
Sent from my iPhone using Tapatalk
This is what I did last year too, until it got cold enough that I started using a pack. Then I stuck them in the stick talons on my platform and lashed to the outside of the pack. Worked, but wasn't elegant or super stable. With the shoulder sling it's fine until you gotta walk through weeds, tall prairie, or brush.
I've tried putting them inside my pack too, with the V brackets facing out. I can't zip the pack shut, but just leave the top open and use load lifter straps to keep the sticks tight to the back. It actually was very comfortable and light. 2 hands free is always a plus. They don't move around much either.
Sent from my SM-G930V using Tapatalk
Yes, bulk and how stable it is. I noticed that the difference in perceived weight between trying to strap sticks to my little ultralight REI pack vs locking them down in my heavier hunting pack with the load lifters to keep everything tight to the back was pretty significant. It brings up the thought, "Why not strap them to a small frame specifically sized for the sticks?I strap my sticks to the outside of my pack using nite ize gear ties. I found that full-length 3-step sticks got hung up on branches and brush a lot but I don't have that problem nearly as much with shorter 2-step sticks (I cut down my hawk heliums).
Using a backpack that properly distributes the weight to your hips, I personally feel that minimizing bulk is more important than minimizing weight. At least with the weights that we are carrying around which are pretty light compared to a hiking pack for an overnight trip, for instance. Everybody prioritizes differently, though, I understand...
Imthere step only requires one because it is notched in the back correct? To make it a single step you should just cut the step off of one side just passed the post to leave the notch intact. This way you would cut a little weight (not very much) and still be able to get away with one Bolt.But a single step requires 2 bolts, and a double only the 1.
I think the was referring to a folding one step requiring two bolts. I don’t see the weight savings being enough for a fixed one step.Imthere step only requires one because it is notched in the back correct? To make it a single step you should just cut the step off of one side just passed the post to leave the notch intact. This way you would cut a little weight (not very much) and still be able to get away with one Bolt.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Imthere step only requires one because it is notched in the back correct? To make it a single step you should just cut the step off of one side just passed the post to leave the notch intact. This way you would cut a little weight (not very much) and still be able to get away with one Bolt.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Regarding I'm there steps:Better idea
Sent from my iPhone using Tapatalk Pro
I'll take a picture next week. Still busy....
Sent from my SM-G900V using Tapatalk
Yeah maybe so. If the weight difference is only about 20 grams between the Lone Wolf single step and the double step that @ImThere is making you should be able to cut that weight difference by just cutting the step off on one side and still only use one Bolt. Can you position the Lone Wolf standoff directly behind the step and use one bolt to go through everything? I don't know that I'm not concerned about shaving such a small amount of weight. I think I'm going to make some ultra-short sticks that are essentially there to hook a multi-step aider to, so I still need a double step on the bottom to hook my aider to. It would essentially be the same thing as using a multi-step aider on a wild Edge step you just don't have to mess with the knot. I found the Versa button or Cam cleat method much easier and faster.I think the was referring to a folding one step requiring two bolts. I don’t see the weight savings being enough for a fixed one step.