CamoMan
Well-Known Member
Has anyone used this upgrade for their bitzenburger? Curious if it is worth it. I see a lot of guys online say it is a great upgrade.
Is it hard to install the upgrade? Looks a little tedious.Absolutely worth it. Been using it for years and would not use a Bitz with out it. If you measure the vane placement with a stock nick receiver you will find that because of the nock moving within the receiver the vanes are not spaced equally around the shaft. They will be with the upgrade.
Sent from my iPhone using Tapatalk
Hahaha super valid point. Especially on 5mm arrows and small vanesIt does look a little tedious, however if you're fletching enough to warrant the upgrade then you're probably on a first name basis with tedious in the first place
How do you know?Definitely worth the upgrade. Just remember that it will change your vane location because you aren't using the nock. I repeat do not use your old mark on your blade! Don't ask me how I know!
Sent from my iPhone using Tapatalk
You done did itHow do you know?
Do you have to drill into the original jig to install the front arrow holder part? I am interested in this upgrade as well.
Yes you do, if you are fletching 5mm and under you would want to do this, but for larger diameter arrows it is not necessary.Do you have to drill into the original jig to install the front arrow holder part? I am interested in this upgrade as well.
Ahh I know this too!Definitely worth the upgrade. Just remember that it will change your vane location because you aren't using the nock. I repeat do not use your old mark on your blade! Don't ask me how I know!
Sent from my iPhone using Tapatalk
I just installed the Zenith and tried to use it with my Sirius Apollo arrows (0.204 ID) and neither attachment fit the arrow. The bigger one was too big, and the smaller one was so small the arrow just spun around it. Am I missing anything? I’m going to call the manufacturer on Monday if I can’t figure it out.
Read my post above. You need one of the other sleeves that don’t come standard. You can get them at 60xcustomstrings with free shipping for 6 bucks. I use axis arrows and need x nock sleeveI just installed the Zenith and tried to use it with my Sirius Apollo arrows (0.204 ID) and neither attachment fit the arrow. The bigger one was too big, and the smaller one was so small the arrow just spun around it. Am I missing anything? I’m going to call the manufacturer on Monday if I can’t figure it out.