Has anyone used this upgrade for their bitzenburger? Curious if it is worth it. I see a lot of guys online say it is a great upgrade.
-
The SH Membership has gone live. Only SH Members have access to post in the classifieds. All members can view the classifieds. Starting in 2020 only SH Members will be admitted to the annual hunting contest. Current members will need to follow these steps to upgrade: 1. Click on your username 2. Click on Account upgrades 3. Choose SH Member and purchase.
-
We've been working hard the past few weeks to come up with some big changes to our vendor policies to meet the changing needs of our community. Please see the new vendor rules here: Vendor Access Area Rules
Zenith upgrade for bitzenburger
- Thread starter CamoMan
- Start date
Absolutely worth it. Been using it for years and would not use a Bitz with out it. If you measure the vane placement with a stock nick receiver you will find that because of the nock moving within the receiver the vanes are not spaced equally around the shaft. They will be with the upgrade.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hahaha super valid point. Especially on 5mm arrows and small vanesIt does look a little tedious, however if you're fletching enough to warrant the upgrade then you're probably on a first name basis with tedious in the first place
Definitely worth the upgrade. Just remember that it will change your vane location because you aren't using the nock. I repeat do not use your old mark on your blade! Don't ask me how I know!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Some of the best lessons learned are taught at the school of hard knocks, from which I am proudly consider myself an alumni.
Following this. Looks interesting. Has anyone used it on longer fletchings, say 4 or 5 inch feathers on a deep helical? Fletch to shaft contact is always a little more challenging with the longer fletchings in my experience.
Yes. They send you a paper jig to use. 2 small holes that will hold the new upper v for shaft to ride in.
Sent from my iPhone using Tapatalk
Yes you do, if you are fletching 5mm and under you would want to do this, but for larger diameter arrows it is not necessary.
Ok, so I installed the Zenith upgrade. It is actually super easy to do. Only takes about 10 min to do. Just make sure if you need to fit X nocks that you buy the x nock sleeve for it as it does not come with the kit. I haven't fletched an arrow yet, but I do have about a half dozen or so to do/redo, so I will post again once I've fletched a few arrows. So far I'm happy with the upgrade and it seems like it eliminates any "play" in the jig.
I just installed the Zenith and tried to use it with my Sirius Apollo arrows (0.204 ID) and neither attachment fit the arrow. The bigger one was too big, and the smaller one was so small the arrow just spun around it. Am I missing anything? I’m going to call the manufacturer on Monday if I can’t figure it out.
I am not familiar with those arrows but .204 you probably need the X nock sleeve.
Read my post above. You need one of the other sleeves that don’t come standard. You can get them at 60xcustomstrings with free shipping for 6 bucks. I use axis arrows and need x nock sleeve